Descrição da solução
Cable Carrier
KGG gives 5 series of strength chains to satisfy consumer requirements.
What is actually the cable chain?
Cable chain is used to carry and shield cables, hydraulics, pneu- matics and other hoses. It regulates the motion of hoses to defend them from intertwining, twisting and hurt. Cable chain is combined by flexible rotating hyperlinks, commonly utilised in exactly where cell electrical power offer required, such as equipment equipment, crane, construction machinery, chopping and welding machines, electronics, warehousing logistics equipment, transportation equipment, injection molding industry, auto manufacturing, metal mill…
Rewards of cable chain program:
1. Flexible apps, not only for cables but also for all hoses (cables, optical cables, hydraulics, pneumatics and so on.)
2. Nearly routine maintenance cost-free, secure and dependable, widly used
3. Modular layout, simple to assemble and maintain
four. Compared with sliding contact line, cable chain technique is a lot more stable, risk-free and dependable
5. In contrast with cable reel, no tension necessity on cables, decreasing cable value, defending cables, rising life span
6. In contrast with cable pulling, optimum half cable cost saved and much less set up space
Specification Listing
| Opening principle | Série | Inner top[mm] | Outer top[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Tom | Max unsupported fill weight [kg/m] | Max unsupported length [m] | Max long travel size [m] | Material of Mounting brackets | |
| Plástico | Aço | |||||||||||
| MC is Non snap-open. ME is Permit to open from 1 side | MC·ME10-15 | ten-fifteen | fourteen-19 | ten – 50 | seventeen – 58 | eighteen – 38 | 20 | .7-1.two | .8-1.4 | 40 | / | |
| ME20-32 | 20-32 | twenty five-39 | fifteen – eighty | 26 – 91 | 28 – one hundred eighty | trinta | 1.5 | one.4 | cinqüenta | / | ||
| QC Split crossbar 1 side | QC20 | 20 | 25 | twenty five – 50 | 36 – 61 | 28 – | 100 | 30 | .cinco | .sessenta e cinco | – | / |
| QC32 | 32 | 39 | twenty five – fifty | 36 – sixty one | 50 – | one hundred twenty five | trinta | .seven | um | – | / | |
| HC Snap-open from equally side | HC20 | twenty.00 | thirty.00 | twenty – a hundred twenty five | 34 – 139 | 35 – 180 | 33 | 5 | 2.six | cento e vinte | / | |
| HC25 | 25.00 | 36.00 | twenty – 125 | 37 – 142 | 50 – two hundred | 40 | dez | 2.8 | cento e cinquenta | / | ||
| HC35 | 35.00 | 56.00 | fifty – 400 | seventy four – 424 | sixty – 250 | sessenta | vinte e cinco | 3.four | 200 | / | ||
| HC45 | forty five.00 | 66.00 | fifty – 400 | 76 – 426 | seventy five – 300 | 70 | 38 | 3.nine | 250 | / | ||
| HC55 | fifty five.00 | seventy seven.00 | 50 – four hundred | 80 – 430 | one hundred twenty five – four hundred | 70 | 45 | 4 | 250 | / | ||
| HC60 | 60.00 | 87.00 | a hundred – 500 | 134 – 534 | a hundred thirty five – four hundred | noventa | sessenta e cinco | cinco | trezentos | / | ||
| HC80 | 80.00 | 108.00 | one hundred – five hundred | 150 – 550 | one hundred fifty – 500 | noventa | sessenta e oito | 6 | trezentos | / | ||
| HT Tube, snap-open from each sides | HT20 | vinte | 30 | forty – one hundred | fifty four – 114 | seventy five – one hundred eighty | 33 | cinco | 2.6 | cento e vinte | / | |
| HT25 | 25 | 36 | 40 – a hundred | 57 – 117 | seventy five – 200 | quarenta | 10 | two.eight | cento e cinquenta | / | ||
| HT35 | 35 | 56 | fifty – four hundred | 74 – 424 | one hundred twenty five – 250 | sessenta | 25 | three.four | 200 | / | ||
| HT45 | 45 | sessenta e seis | fifty – 400 | seventy six – 426 | one hundred twenty five – three hundred | 70 | 38 | three.nine | 250 | / | ||
| HT55 | cinquenta e cinco | 77 | fifty – 400 | eighty – 430 | 150 – four hundred | 70 | quarenta e cinco | 4 | 250 | / | ||
| HT60 | 60 | 87 | 100 – 500 | 134 – 534 | one hundred fifty – 400 | 90 | 65 | cinco | trezentos | / | ||
| HT80 | oitenta | 108 | 100 – five hundred | 150 – 550 | two hundred – five hundred | noventa | sessenta e oito | seis | trezentos | / | ||
| XC Open up, snap-open up from each sides | XC30 | 30 | 40 | 20 – a hundred twenty five | 36 -141 | 55 – 200 | 25 | 3 | 1.seis | 50 | / | |
| EC Open up, snap-open from both sides | EC35 | 35 | 50 | 20 – 125 | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open up from equally sides | ET35 | 35 | 50 | 50 – one hundred twenty five | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
Manufacturing facility Detailed PROCESSING Images
Large Good quality Control Technique
Perguntas frequentes
one. Why select CZPT China?
In excess of the past seventeen a long time, CZPT has always insisted that “merchandise and solutions” start off from Japanese business expectations,taking ZheJiang specifications as the base line, actively spend in the advancement of new transmission parts and self-experiment and take a look at. With the services tenet of “exceeding customer anticipations”, create a “trustworthy” partnership.
2. What is your principal merchandise ?
We are a major company and distributor of linear motion components in China. Specially miniature size of Ball Screws and Linear Actuators and linear movement guideways. Our brand name “KGG” stands for ” Know-how,” ” Excellent Good quality,” and ” Great price” and our factory is situated in the most superior town in China: ZheJiang with the greatest gear and refined engineering, entirely stringent high quality handle program. Our purpose is to provide entire world leader course linear motion components but with most realistic price in the globe.
3. How to Personalized-made (OEM/ODM)?
If you have a solution drawing or a sample, please ship to us, and we can personalized-made the as your essential. We will also give our professional advices of the products to make the style to be more realized & optimize the performance.
four. When can I get the quotation?
We generally quotation in 24 several hours after we get your inquiry. If you are very urgent to get the price,remember to contact us or inform us in your e mail so that we will regard your inquiry priority.
five. How can I get a sample to verify the quality?
After affirmation of our quoted price tag, you can location the sample buy. The sample will be started out soon after you indicator back our in depth specialized file.
six. What’s your payment terms?
Our payment conditions is 30% deposit,stability 70% ahead of shipment.
| To Be Negotiated | 1 peça (Pedido mínimo) |
###
| Logo Printing: | with Logo Printing |
|---|---|
| Tamanho: | Various Models |
| Personalizado: | Non-Customized |
| Tipo: | Cable Carrier |
| Material: | Aço |
| Certificação: | ISO 9001:2008, ISO 9001:2000 |
###
| Personalização: |
Disponível
|
|---|
###
| Opening principle | Série | Inner height[mm] | Outer height[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Tom | Max unsupported fill weight [kg/m] | Max unsupported length [m] | Max long travel length [m] | Material of Mounting brackets | |
| Plástico | Aço | |||||||||||
| MC is Non snap-open. ME is Enable to open from one side | MC·ME10-15 | 10-15 | 14-19 | 10 – 50 | 17 – 58 | 18 – 38 | 20 | 0.7-1.2 | 0.8-1.4 | 40 | / | |
| ME20-32 | 20-32 | 25-39 | 15 – 80 | 26 – 91 | 28 – 180 | 30 | 1.5 | 1.4 | 50 | / | ||
| QC Split crossbar one side | QC20 | 20 | 25 | 25 – 50 | 36 – 61 | 28 – | 100 | 30 | 0.5 | 0.65 | – | / |
| QC32 | 32 | 39 | 25 – 50 | 36 – 61 | 50 – | 125 | 30 | 0.7 | 1 | – | / | |
| HC Snap-open from both side | HC20 | 20.00 | 30.00 | 20 – 125 | 34 – 139 | 35 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HC25 | 25.00 | 36.00 | 20 – 125 | 37 – 142 | 50 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HC35 | 35.00 | 56.00 | 50 – 400 | 74 – 424 | 60 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HC45 | 45.00 | 66.00 | 50 – 400 | 76 – 426 | 75 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HC55 | 55.00 | 77.00 | 50 – 400 | 80 – 430 | 125 – 400 | 70 | 45 | 4 | 250 | / | ||
| HC60 | 60.00 | 87.00 | 100 – 500 | 134 – 534 | 135 – 400 | 90 | 65 | 5 | 300 | / | ||
| HC80 | 80.00 | 108.00 | 100 – 500 | 150 – 550 | 150 – 500 | 90 | 68 | 6 | 300 | / | ||
| HT Tube, snap-open from both sides | HT20 | 20 | 30 | 40 – 100 | 54 – 114 | 75 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HT25 | 25 | 36 | 40 – 100 | 57 – 117 | 75 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HT35 | 35 | 56 | 50 – 400 | 74 – 424 | 125 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HT45 | 45 | 66 | 50 – 400 | 76 – 426 | 125 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HT55 | 55 | 77 | 50 – 400 | 80 – 430 | 150 – 400 | 70 | 45 | 4 | 250 | / | ||
| HT60 | 60 | 87 | 100 – 500 | 134 – 534 | 150 – 400 | 90 | 65 | 5 | 300 | / | ||
| HT80 | 80 | 108 | 100 – 500 | 150 – 550 | 200 – 500 | 90 | 68 | 6 | 300 | / | ||
| XC Open, snap-open from both sides | XC30 | 30 | 40 | 20 – 125 | 36 -141 | 55 – 200 | 25 | 3 | 1.6 | 50 | / | |
| EC Open, snap-open from both sides | EC35 | 35 | 50 | 20 – 125 | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open from both sides | ET35 | 35 | 50 | 50 – 125 | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| To Be Negotiated | 1 peça (Pedido mínimo) |
###
| Logo Printing: | with Logo Printing |
|---|---|
| Tamanho: | Various Models |
| Personalizado: | Non-Customized |
| Tipo: | Cable Carrier |
| Material: | Aço |
| Certificação: | ISO 9001:2008, ISO 9001:2000 |
###
| Personalização: |
Disponível
|
|---|
###
| Opening principle | Série | Inner height[mm] | Outer height[mm] | Inner width[mm] | Outer width[mm] | Bending radius[mm] | Tom | Max unsupported fill weight [kg/m] | Max unsupported length [m] | Max long travel length [m] | Material of Mounting brackets | |
| Plástico | Aço | |||||||||||
| MC is Non snap-open. ME is Enable to open from one side | MC·ME10-15 | 10-15 | 14-19 | 10 – 50 | 17 – 58 | 18 – 38 | 20 | 0.7-1.2 | 0.8-1.4 | 40 | / | |
| ME20-32 | 20-32 | 25-39 | 15 – 80 | 26 – 91 | 28 – 180 | 30 | 1.5 | 1.4 | 50 | / | ||
| QC Split crossbar one side | QC20 | 20 | 25 | 25 – 50 | 36 – 61 | 28 – | 100 | 30 | 0.5 | 0.65 | – | / |
| QC32 | 32 | 39 | 25 – 50 | 36 – 61 | 50 – | 125 | 30 | 0.7 | 1 | – | / | |
| HC Snap-open from both side | HC20 | 20.00 | 30.00 | 20 – 125 | 34 – 139 | 35 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HC25 | 25.00 | 36.00 | 20 – 125 | 37 – 142 | 50 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HC35 | 35.00 | 56.00 | 50 – 400 | 74 – 424 | 60 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HC45 | 45.00 | 66.00 | 50 – 400 | 76 – 426 | 75 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HC55 | 55.00 | 77.00 | 50 – 400 | 80 – 430 | 125 – 400 | 70 | 45 | 4 | 250 | / | ||
| HC60 | 60.00 | 87.00 | 100 – 500 | 134 – 534 | 135 – 400 | 90 | 65 | 5 | 300 | / | ||
| HC80 | 80.00 | 108.00 | 100 – 500 | 150 – 550 | 150 – 500 | 90 | 68 | 6 | 300 | / | ||
| HT Tube, snap-open from both sides | HT20 | 20 | 30 | 40 – 100 | 54 – 114 | 75 – 180 | 33 | 5 | 2.6 | 120 | / | |
| HT25 | 25 | 36 | 40 – 100 | 57 – 117 | 75 – 200 | 40 | 10 | 2.8 | 150 | / | ||
| HT35 | 35 | 56 | 50 – 400 | 74 – 424 | 125 – 250 | 60 | 25 | 3.4 | 200 | / | ||
| HT45 | 45 | 66 | 50 – 400 | 76 – 426 | 125 – 300 | 70 | 38 | 3.9 | 250 | / | ||
| HT55 | 55 | 77 | 50 – 400 | 80 – 430 | 150 – 400 | 70 | 45 | 4 | 250 | / | ||
| HT60 | 60 | 87 | 100 – 500 | 134 – 534 | 150 – 400 | 90 | 65 | 5 | 300 | / | ||
| HT80 | 80 | 108 | 100 – 500 | 150 – 550 | 200 – 500 | 90 | 68 | 6 | 300 | / | ||
| XC Open, snap-open from both sides | XC30 | 30 | 40 | 20 – 125 | 36 -141 | 55 – 200 | 25 | 3 | 1.6 | 50 | / | |
| EC Open, snap-open from both sides | EC35 | 35 | 50 | 20 – 125 | 37 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
| ET Tube, snap-open from both sides | ET35 | 35 | 50 | 50 – 125 | 67 – 142 | 75 – 250 | 33 | 8 | 2.2 | 50 | / | |
Pin chain conveyor
The choice between roller chains and friction drives depends on the usage environment. Roller chains are more resistant to dirty environments and are more suitable for conveying bulk products. The pivot chain is designed to handle highly bulk products. Ideally, the center-to-center distance between the two axles should be thirty to fifty times the chain pitch. The size of the sprocket will depend on the usage environment, which will also determine the fatigue strength and resistance of the chain.
Roller chains are more resistant to dirty environments
There are some key differences between drive chains and roller chains. The most notable difference is in the materials. Drive chains are generally more durable than roller chains. However, both chains are prone to dirty environments. While solution chains are sometimes used for heavy-duty tasks, roller chains are often used in dirtier environments. In fact, drive chains are often used when the job is very dirty and the chain has to slide on the rails.
The new lubricant used on the roller chain attracts dirt and other debris to the surface of the chain and prevents lubricant from entering the load-carrying parts of the chain, such as hinge plates, bushings, and rollers. When dust is drawn into these components, lubricants, and dirt form an abrasive paste that accelerates wear.
Lube-free roller chains keep chains clean longer. This makes it easier to specify and install in areas with strict hygiene requirements. CZPT lube-free roller chains meet NSF-H1 lubrication standards. However, lubricated roller chains are still suitable for areas where food contact is unlikely.
Stainless steel roller chains are particularly resistant to acids, alkalis, and low-temperature environments. Since stainless steel is softer than carbon steel, lubricants are not as effective at preventing dirt from entering the chain. Stainless steel roller chains have a higher strength rating than standard chains, but are not as strong as chains made from carbon steel. If you are using a roller chain in a very dirty environment, you should use a stainless steel chain.
A stud chain is more efficient than a friction drive
The present invention relates to a light-duty double-ended chain that is more efficient than conventional chains. Stud chains are made by die-forging bar steel into roughly the-shaped links. This method avoids loss of shear strength due to bending and also minimizes the welded portion. The double-headed chain is light in weight and has strong resistance to fatigue damage.
This chain type has a stud-style design. Stud-shaped design provides greater tensile strength and prevents tangling. Each stud is formed by die forging and is usually shaped like an e or th. However, it is not necessary for each stud to have a uniform cross-sectional shape. Different cross-sectional shapes can be used depending on the application.
Stud chains are more efficient than friction drives because the studs in the chain are integrated. Stud links resist large breaks. Its applications are in conveyor chains and fisheries. Wear tested on boat chains made of SBC material. In the process, bolt chains were found to be more efficient than friction drives. Its applications are rapidly expanding.
Double-ended chains are more efficient for high-load applications. It features studs throughout its internal width to prevent kinking. Chains of this type are commonly used for heavy lifting machinery. Other types of chains are roller chains, power transmission chains, and bushing roller chains. These types of chains are also widely used in motorcycle, bicycle and transportation applications. In addition to being more efficient, stud chains also have fewer wear problems than friction drive chains.
A study on the difference between wear percentage and friction time showed that stud chains are more efficient than friction drives. The friction strips were measured at the beginning of the test. Take it off after 6 hours, 10080 times, and take pictures with the same diameter. As a boundary value, the diameter of the friction strip is smaller than that of a conventional chain. This shows that the present invention has better wear resistance than friction drives.
Shaft chains designed for conveying bulk products
Pivot chains are versatile conveyors used in many applications. Low back type, small backrest distance, rear opening design to prevent the product from sticking to the joints and causing stiffness. Stainless steel and carbon bushing pin chains do not have pre-rotating rollers. In contrast, bucket elevators do not use pivot chains.
CZPT pin chains provide unmatched performance in agricultural and industrial machinery. They are constructed from a single cast barrel and are connected by hardened steel pins. CZPT’s steel pivot chains are strong enough to withstand the corrosive environments of agricultural and industrial applications. The steel pins in the CZPT Pintle Chain are hardened and riveted to ensure long-term durability and optimum performance.
Lifeguard chains feature patented interlocking side links that reduce gaps between adjacent side panels. They can withstand a variety of applications and will never break under pressure. These chains are available in 1/2” and 1” pitch configurations. CZPT combines both types of pin chains to achieve the best of both worlds. CZPT features dual pin chains and pin joints to increase chain durability and reduce maintenance hassles.
CZPT’s engineering team can custom design pivot chains for your specific application. Designed for specific speed, friction, temperature and wear requirements, these chains are ideal for a variety of applications. Headquartered in Milwaukee, Wisconsin, the company operates on two strategic platforms: Food and Beverage and Industrial Applications. The products of these companies are used in food, energy and manufacturing.
editor by czh 2022-12-21
