Higher Torque Low Rpm Planetary Equipment Motor 56mm 12V
Gearbox knowledge:
| Cantidad de etapas | reducción de 1 etapa | 2 levels reduction | reducción de tres fases | four levels reduction | 5 phases reduction |
| Relación de reducción | three.seven,5.two | 13.seven,19.2,26.9 | 50.nine,seventy one.two,99.five,139 | 188,264,369,516,721 | 669,977,1367,1911,2672,3736, |
| gearbox size ” L” mm | 26.4 | 32.6 | 38.9 | 45.three | 52.5 |
| Max.Running torque | three.0Kgf · cm | six.0Kgf · cm | eight.0Kgf · cm | 12.0Kgf · cm | 20Kgf · cm |
| Max. Equipment breaking torque | nine.0Kgf · cm | eighteen.0Kgf · cm | 24Kgf · cm | 36Kgf · cm | 60Kgf · cm |
| Max. Gearing efficiency | noventa y un TP3T | ochenta y uno% | 73% | 65% | fifty nine% |
Motor info:
| Motor name | Voltaje nominal | Sin carga | par de carga | par de calado | |||||
| Reciente | Paso | Actual | Velocidad | Esfuerzo de torsión | Output power | Esfuerzo de torsión | Actual | ||
| mamá | r/min | mamá | r/min | gf · cm | W | gf · cm | mamá | ||
| TG-38123400 | doce | ≤40 | 3400 | ≤180 | 2500 | 40 | 1. | one hundred sixty | 720 |
| TG-38124500 | doce | ≤50 | 4500 | ≤350 | 3300 | sesenta | 2. | 210 | 1400 |
| TG-38126000 | 12 | ≤70 | 6000 | ≤720 | 4500 | ochenta | three.six | 300 | 2800 |
| TG-38243000 | 24 | ≤15 | 3000 | ≤80 | 2200 | 40 | .9 | ciento cuarenta | 320 |
| TG-38244500 | 24 | ≤25 | 4500 | ≤180 | 3300 | 60 | dos. | 200 | 730 |
| TG-38246700 | 24 | ≤45 | 6700 | ≤360 | 4500 | 80 | three.six | trescientos | 1400 |
| 1,This table lists some motors parameters, other individuals make sure you refer to particular parameters of tg-38-one.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput velocity:motor speed / reduction ratio. |
|||||||||
Notice:
1, Gearmotor named methods: e . g . PG36M528123000-99.5K Motor please refer to the motor information TG-38123000.
Gearbox please refer to gearbox info reduction ratio99.five .Relevant to gearmotor output velocity and torque please
refer to motor info.
2, Motor can be mounted wiht magnetic encorder. encorder parameters you should refer to me-32.htm.
3,CZPT output shaft after lowering: dia8.0mm. other measurements of then output shaft can make as client request.
4,Chart only for reference,items shall prevail the entity.
Firm Introduction
