Electrical AC Gear Motor for BBQ Machines Hub Motor with Ce

1. Stator size is optional
2. Protected, dependable, lower sounds, good beginning, lengthy life
3. Sturdy electricity
Rated voltage a hundred and ten~120V/220~240V-fifty/60Hz
Typical utilised: 
Cross blower motors use on typically Heater, Air cooling Enthusiast and many others
Вольт (В) = 110В - 240В
Частота (Гц) = 50/60 Гц
Recent(A)=.eighteen-.forty three based on different stator thickne
Input energy on loading: From 13W to 36W dependent on various stator thickness
Torque: 60g. Cm to 120g. Cm based on different stator thickness

Shaft diameter(mm)=four-6mm
Shaft duration(mm)=according to customer’s necessity
Speed(r/min): 2600-3400 based on different stator thickness
Admirer Diameter: 60mm
Supporter size: Optional from 120mm to 360mm
 

МОДЕЛЬ	AOF SIZE	SHAFE DIA	ВОЛЬТ	Input POWER	TORQUE (g.cm )	SPEED RATED
YJ6012	12 мм	4 мм	110-240 В	18 Вт	сто двадцать	3000 об/мин
YJ6014	14 мм	четыре,5 мм	сто десять-240В	25 Вт	сто пятьдесят	3000 об/мин
YJ6016	16 мм	4.5mm	сто десять-240В	30 Вт	сто восемьдесят	3000 об/мин
YJ6571	20 мм	5 мм	сто десять-240В	35 Вт	260	3000 об/мин
YJ6571	25 мм	6 мм	110-240 В	45 Вт	350	3000 об/мин
YJ6030	30 мм	6 мм	сто десять-240В	53W	380	3000 об/мин

О НАС

Ritscher team was established up in 2006.we often focus on micro-motors for home electrical equipment and industry appliance given that location up.at present we have two skilled micro-motor factories in China  which severally situated in HangCZPT metropolis and HangCZPT city.it has an area of twenty five,000 sq. meters crops and far more than three hundred personnel, yearly output  is 3 million pcs and has five million pcs once-a-year making potential.right after a number of several years advancement,we had developed a fantastic status in the marketplace and received more and more customers’  trust in the world.
We  started from shaded pole motors  at beginning, up to now,our solution  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our solution  are extensively utilized for making refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage devices and a lot of other equipments.
As a realiable good quality guaranty,Ritscher has full R&D departement,QC department,creating office,purchase department etc. has best creating products like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, CZPT injection molding and many others. also examination/ detection system like multiplex temp measuring system, overall performance parameter inspection device, Phenol peptide answer pinhole tester,Anechoic place and so forth.
 
Endeavoring to provide the ideal merchandise and provider to consumers,we usually do the most work to turn out to be an excellent company of micro motors.
Ritscher is always willing to build honest company partnership with buddies from all in excess of the world.
Welcome make contact with with us!
 
Consider ritscher ,take pleasure in present day lifestyle!

Our organization FAQ for you

(one) Q: What sort motors you can offer?
A:For now,we mostly give Kitchen Hood Motor,DC Motor,Equipment Motor,Admirer Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so forth.

(two) Q: Is it attainable to visit your manufacturing unit
A: Positive. But make sure you kindly maintain us posted a couple of times in advance. We need to verify our
timetable to see if we are CZPT then.

(three) Q: Can I get some samples
A: It depends. If only a few samples for personalized use or alternative, I am afraid it will
be tough for us to give, because all of our motors are personalized manufactured and no stock
CZPT if there is no even more needs. If just sample testing prior to the formal purchase and
our MOQ, price tag and other conditions are acceptable, we’d enjoy to supply samples.

(four) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is amongst a thousand~ten,000pcs for distinct models soon after sample approval.
But it is also all right for us to acknowledge scaled-down tons like a number of dozens, hundreds or thousands
For the original 3 orders following sample acceptance.For samples, there is no MOQ necessity. But the significantly less the better (like no far more than 5pcs) on situation that the quantity is ample in scenario any changes necessary following initial screening.