The four axis rotary desk can be utilized in horizontal and vertical placement on equipment heart and millling machine.
three-jaw or 4 jaw lathe chuck and tailstock can be equipped according to customers’ purchase.
| 不。 | Things | RN170 | RN200 | RN250 | RN315 |
| 1 | Table diameter,mm | a hundred and seventy | 二百 | 250 | 315 |
| 2 | Middle height in Vert.,mm | 155 | 170 | a hundred ninety | 225 |
| 三 | Total thickness,mm | 一百八十 | 188 | 193 | 250 |
| 4 | Center bore dia.,mm | Φ40H7 | Φ40H7 | Φ40H7 | Φ50H7 |
| 5 | Locating important,mm | 18 | 18 | 18 | 18 |
| 6 | T-slot,mm | four-12 | four-twelve | 6-twelve | six-fourteen |
| seven | Worm gear ratio | 1:72 | one:seventy two | 1:seventy two | one:72 |
| 8 | Complete reduction ratio | 1:72 | one:72 | one:seventy two | 1:72/one:144 |
| 9 | Max.velocity,motor 2000 r/min | 27.7 | 27.seven | 27.seven | 27.seven |
| 十 | Graduation angle per pulse | .001° | .001° | .001° | .001° |
| 十一 | Servo motor torque,Nm | ≥4 | ≥4 | ≥6 | ≥8 |
| 12 | Dividing accuracy | 20″ | twenty” | twenty” | twenty” |
| 十三 | Repeatability | 4″ | 4″ | four” | 4″ |
| 14 | Clamp torque,Kg.m ( Pneumatic .5MPa) | 10 | 二十 | 35 | 六十 |
| 十五 | Vert.max.load,kg | 50 | 75 | 100 | 一百五十 |
| 十六 | Hor.max.load,kg | 150 | 200 | 250 | 350 |