产品描述
产品描述
sprocket wheel for Brazil market
Motorcycle Sprocket Wheel, Motorcycle Sprocket Set, Chain Sprocket, Motorcycle Parts, Rear Sprocket, Front Sprocket, Cg125 Sprocket, Inner Sprocket, Engine Part, Motor Sprocket, Motorcycle spare Parts, Motorcycle chain wheel, motorcycle chain, Sprocket Wheel, Sprocket
HONDA:
C50, B50, C70, CD70, DAX70, MB80, C90, CD90, S90, H100, C100, C100-BIZ, CB100, CD100, MB100, XL100, S110, CB125, CD125, CG125, TITAN-99, TITAN-2000, TITAN-150, NX125, XL125, XLR125, GL145, CBX150, NXR150 BROS, CBX200, NX200, TRX200, XL200R, CB250, XL250, CBR250, NX250, CBX250, VT250, XL250, NX250, TRX350, CB400, CBR400, NX350SHAHAR, XLX250/350, NX200, XR250, XR200, CB250N, CD100, DAX70, NX400, XR200, XR250, XR200R, GS125
SUZUKI:
A50, GT50, RV50, A80, FR80, DS80, FR80N, RV90, A100, AX100, FB100, FR100, TS100, GP100, ER100, TS100Z, AX115, FD115, CN125, ER125, GN125, GP125, GS125, TR125, AX115, FR100, C70, C90, TS185ER, G7T
YAMAHA:
DT50, GT50, RD50, RX50, YB50, RD75, FS80, GT80, LB80, RX80, V80, YB80, AG100, DT100, DX100, RS100, RX100, YB100, DT125, DT125T, DT125K, DT125R, RD125, RZD125, RS125, SR125, TW125, TZR125, YB125, XT125, YBR125, RD135, RX135, RXZ135, DT150, SR150, DT175, DT180, MX180, RX180, XV250, DT250, SR250, XT250, DT175K 6H, DT175K 4H, TDR250, YZ125, SIGMA100, CRYPTON
KAWASAKI:
GTO125, KAZE-R, GTO110
DAELIM LIBERTY 12T X 44T
ENG DAELIM ALTINO 100 40T
GARELLI ESTR 10T
GILERA SMASH 110 15T X 36T
GUERRERO DAY 100 15T X 38T
GUERRERO FLASH 110 14T X 41T
GUERRERO GLX 14T X 56T
GUERRERO TRIP 110 14T X 36T
HERO PUCH 13T X 33T
INTRUDER/HYOSUNG TN 125 14T
JNG SUZUKI GS/KATANA 125
JUKI DRIB 12T
MIN C/REBORDE 9T
MIN C/REBORDE 10T
N MAX(420) 39T
N MAX 100(420) 15T
RZF200/ANDINA125/RB125/00(77-)/PATAG 14T
TVS 13T X 39T
XX125/RX125/RZA125/SAPUCA125
Z RX/RZA125 44T
ZAN SOL 42T
ZAN XX125 15T
ZANELLA 70(FIRE PLUS) 10T
ZANELLA DUE/POCK 35T
ZANELLA DUE/POCK 38T
ZANELLA XX125/RX125/SAPUCA125
There are many items for Austrialia, Indonesia, Malaysia, Singapore, Thailand, Philippines, India, Turkey, Sri Lanka, West African, South African market and so on.
Your enquiry will be highly appreciated.
Company introduction
DINGJIAN WHEEL Co., Ltd locates in Xihu (West Lake) Dis.qiao Industrial Zone which is renowned for the base of China Motorcycle Sprockets Manufacturing. Our company is a typical manufacturing enterprise with designing, manufacturing and selling as a whole service chain.
DINGJIAN WHEEL Co., Ltd was set up in 1996, covering a total land of 12,000 square CHINAMFG and a constructive area of 8,000 square meters. Under a total investment of 20 million RMB yuan, our company owns the most advanced production equipments, perfect quality inspection system, highly efficient sales and management team and first-class technicians; since we adopt advanced production techniques and superior steel, our products have reached high standard of durability and a series of advanced national level. As our products passed the authentication of global ISO9001 quality system, our company has the power of manufacturing a complete set of sprocket products to fit the needs of motorcycle factories.
Since the founding of CHINAMFG WHEEL Co., Ltd, we uphold consistently the principles of laying full emphasis on needs of consumers, products’quality and commercial creditability; stressing the idea of common business aim, business starting, mutual benefits and developments, for building up Double Win relation with clients;our company has won the trust of a wide range of clients by competitive price and better service, this is why our company obtains better goodwill in this sprocket industry with our products selling well China-wide. and selling far to many regions like South-East Asia. Middle-East. South-America. Africa Europe and so on.
For many years, CHINAMFG WHEEL Co., Ltd insisted on a development policy of Enterprise’ Life Relies on Products’ Quality, we are succeed in fulfilling our famous brand position. DINGJlAN people have confidence in our prosperous development, we will believe in the idea of Brand Relies on Quality, and Effectiveness Depends on Scale. By upholding our development idea, we can achieve our CHINAMFG task of becoming leader in sprockets’ industry by persisting in our quality and management idea permanently. DINGJIAN WHEEL Co., Ltd is expecting your cooperation for mutual benefit producing.
>> Feedback
1.Since your feedback is very important to our business’s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service.
2.Please contact us before disputes or leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you for your understanding!
| 标准或非标准： | 标准 |
|---|---|
| 应用： | Motor, Motorcycle, Machinery |
| 硬度： | Soft Tooth Surface |
| 制造方法： | Cast Gear |
| 齿状部分形状： | 正齿轮 |
| 材料： | 不锈钢 |
| 示例： | US$ 10/件 1 件（最低订购量） | |
|---|
| 定制化： | 可用的 | 定制请求 |
|---|
如何排查电机链条的常见问题？
电机链条常见问题的排查包括找出问题的根本原因并采取相应的纠正措施。以下列举了一些电机链条的常见问题及其排查步骤：
1. Chain slipping or jumping: If the motor chain slips or jumps on the sprockets, it can indicate insufficient tension, worn-out sprockets, or a damaged chain. Check the tension of the chain and adjust it according to the manufacturer’s recommendations. Inspect the sprockets for signs of wear or damage and replace them if necessary. Additionally, examine the chain for any damaged or worn-out links and replace the chain if needed.
2. 噪音过大：电机链条噪音过大可能是由多种因素造成的，例如链条错位、润滑不足、部件磨损或张紧度不当。检查链条是否存在错位问题，必要时进行调整。确保使用推荐的润滑剂对链条进行充分润滑。检查是否有磨损或损坏的部件，并根据需要进行更换。将链条张紧度调整至正确的规格。
3. 链条卡滞或堵塞：如果电机链条在运转过程中出现卡滞或堵塞，可能是由于链条未对准、杂物堆积或润滑不足造成的。检查链条和链轮是否存在未对准的情况，必要时进行调整。清除链条或链轮上积聚的杂物或异物。确保链条润滑良好，以减少摩擦并提高运转顺畅度。
4. Chain wear and elongation: Excessive chain wear and elongation can lead to poor performance and decreased efficiency. Regularly monitor the chain for signs of wear and measure its elongation using a chain wear gauge. If the wear exceeds the manufacturer’s recommendations, it is advisable to replace the chain with a new one.
5. 润滑不足：润滑不足会导致摩擦增加、磨损加剧，并造成电机链条过早失效。检查润滑系统，确保链条使用推荐的润滑剂进行充分润滑。如有必要，调整润滑频率或方法，以确保最佳润滑效果。
When troubleshooting motor chain issues, it is important to refer to the manufacturer’s guidelines and recommendations. If the problem persists or if you are unsure about the appropriate troubleshooting steps, it is recommended to consult a professional or the chain manufacturer for further assistance.
如何正确润滑和保养发动机链条？
适当的润滑和维护对于确保电机链条的最佳性能和使用寿命至关重要。以下是正确润滑和维护电机链条的步骤：
1. 清洁链条：润滑前，请清洁电机链条，去除污垢、碎屑或残留润滑油。使用合适的清洁剂和刷子或抹布轻轻擦洗链条。确保链条完全干燥后再进行下一步操作。
2. Choose the right lubricant: Select a lubricant specifically designed for motor chains. Consider factors such as the operating conditions, temperature, and load requirements when choosing the lubricant. Consult the manufacturer’s recommendations or seek professional advice if necessary.
3. 涂抹润滑剂：将润滑剂均匀涂抹于整条链条上。使用合适的涂抹器或喷雾瓶，确保润滑剂充分覆盖。特别注意链条与链轮的接触点。
4. 去除多余润滑油：涂抹润滑油后，静置几分钟使其充分渗透链条。然后用布或抹布擦去多余的润滑油。这有助于防止灰尘和碎屑在链条上积聚。
5. 定期检查：定期检查电机链条，查看是否有磨损、腐蚀或损坏迹象。检查链条是否拉长、链片是否开裂、销轴是否损坏或间隙过大。如果发现任何问题，应采取适当措施，例如更换链条或维修损坏的部件。
6. Tension adjustment: Check the tension of the motor chain regularly. Improper tension can cause excessive wear and reduce the chain’s performance. Follow the manufacturer’s guidelines or consult a professional to ensure proper tensioning.
7. 制定维护计划：为电机链条制定维护计划。这包括定期清洁、润滑、检查以及任何必要的调整或更换。严格按照计划进行维护，以保持链条处于最佳状态。
遵循这些步骤并保持定期维护，可以最大限度地提高电机链条的性能和使用寿命。
如何为特定电机选择合适的电机链条？
为特定电机选择电机链条时，需要考虑多个因素。以下是分步指南：
1. Determine the motor specifications: Start by understanding the motor’s power rating, speed, and torque requirements. This information will help you choose a motor chain that can handle the motor’s power output and torque demands.
2. Identify the application requirements: Consider the specific application in which the motor will be used. Determine if the motor will be subjected to high loads, high speeds, or harsh environmental conditions. This will help you select a motor chain that is suitable for the application’s demands.
3. 确定链条类型：电机链条有多种类型，包括滚子链、静音链、衬套链等等。每种链条都有其自身的特性和性能。选择链条类型时，应考虑电机和应用的具体要求。
4. Calculate the chain size: Determine the required chain size based on the motor’s power and torque requirements. Consider factors such as pitch size, roller diameter, and number of chain links. Manufacturers typically provide chain size charts or calculation tools to assist in selecting the right chain size.
5. 考虑环境因素：考虑电机运行的环境条件。如果电机暴露于潮湿、化学品、高温或其他恶劣环境中，则应选择具有相应耐腐蚀性、耐温性和耐久性的电机链条。
6. Consult manufacturer recommendations: Consult the motor manufacturer’s recommendations or specifications to identify any specific requirements or restrictions for motor chains. They may provide guidance on compatible chain types, lubrication requirements, and maintenance recommendations.
7. 评估成本和可用性：考虑所选电机链的成本和可用性。评估初始成本、维护要求以及备件或替换件的可用性等因素。
By considering these factors and conducting thorough research, you can select the right motor chain that matches the motor’s specifications, application requirements, and environmental conditions. It is recommended to consult with motor and chain manufacturers or industry experts for further guidance and assistance.
editor by CX 2023-10-17