Higher Torque Low Rpm Planetary Equipment Motor 56mm 12V
Gearbox knowledge:
| Aşama sayısı | 1 aşamalı azalma | 2 levels reduction | üç aşamalı indirgeme | four levels reduction | 5 phases reduction |
| İndirgeme oranı | three.seven,5.two | 13.seven,19.2,26.9 | 50.nine,seventy one.two,99.five,139 | 188,264,369,516,721 | 669,977,1367,1911,2672,3736, |
| gearbox size ” L” mm | 26.4 | 32.6 | 38.9 | 45.three | 52.beş |
| Max.Running torque | three.0Kgf · cm | six.0Kgf · cm | eight.0Kgf · cm | 12.0Kgf · cm | 20Kgf · cm |
| Max. Equipment breaking torque | nine.0Kgf · cm | eighteen.0Kgf · cm | 24Kgf · cm | 36Kgf · cm | 60Kgf · cm |
| Max. Gearing efficiency | doksan% | seksen bir% | 73% | 65% | fifty nine% |
Motor info:
| Motor name | Nominal voltaj. | Yük yok | Yük torku | Durma torku | |||||
| Son | Adımlamak | Akım | Hız | Tork | Çıkış gücü | Tork | Akım | ||
| mA | r/dakika | mA | r/dakika | gf · cm | W | gf · cm | mA | ||
| TG-38123400 | on iki | ≤40 | 3400 | ≤180 | 2500 | 40 | 1. | yüz altmış | 720 |
| TG-38124500 | on iki | ≤50 | 4500 | ≤350 | 3300 | altmış | 2. | 210 | 1400 |
| TG-38126000 | 12 | ≤70 | 6000 | ≤720 | 4500 | seksen | üç.altı | 300 | 2800 |
| TG-38243000 | 24 | ≤15 | 3000 | ≤80 | 2200 | 40 | .9 | yüz kırk | 320 |
| TG-38244500 | 24 | ≤25 | 4500 | ≤180 | 3300 | 60 | iki. | 200 | 730 |
| TG-38246700 | 24 | ≤45 | 6700 | ≤360 | 4500 | 80 | üç.altı | üç yüz | 1400 |
| 1,This table lists some motors parameters, other individuals make sure you refer to particular parameters of tg-38-one.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput velocity:motor speed / reduction ratio. |
|||||||||
Notice:
1, Gearmotor named methods: e . g . PG36M528123000-99.5K Motor please refer to the motor information TG-38123000.
Gearbox please refer to gearbox info reduction ratio99.five .Relevant to gearmotor output velocity and torque please
refer to motor info.
2, Motor can be mounted wiht magnetic encorder. encorder parameters you should refer to me-32.htm.
3,CZPT output shaft after lowering: dia8.0mm. other measurements of then output shaft can make as client request.
4,Chart only for reference,items shall prevail the entity.
Firm Introduction
