Jumbo Roll Paper Slitting Rewinding Device
Requirements:
one. It adopts Emerson PLC control method and 10″ touch display, all the operating parameters can be shown on the manage panel then the device will computerized work.
two. It adopts two sets of Yaskawa frequency inverter which is from Japan to make functioning device a lot more stable.
three. It adopts two sets of Fukuta inverter motor, which is from ZheJiang .
four. It adopts three sets fully automatic stress management to supply the continual stress to the end.
5. Computerized lift-up loading technique for hefty jumbo roll loading.
six. A established of photocell tracking technique imported from Germany.
seven. Computerized meter counter to quit the machine when it get to the pre-set size.
8. Air Blower and blower pipe for trimming the waste edge.
| 仕様 | |
| カテゴリ | Automatic Shaftless & Coreless Paper Slitter Machine |
| Application Materials | Standard Papers,Kraft Paper, Bond Paper, Paper Board,Non-woven Cloth, Movie, Aluminum Foil, CZPT Sheet etc. |
| Relevant Width of Axial / Substance | 600mm ~ 2800mm /23.six-110″ (CZPTizable) |
| Min. Width of Slitting | 10mm (Based on sorts of supply materials are utilized) |
| Max.Device Speed | 300m/min (Relying on types of material applied) |
| Max.Unwinding Diameter | 1500mm /59″ |
| Max.Rewinding Diameter | 1500mm(CZPTizable) |
| Tolerance of Slitting Width | ±0.15mm(Dependent on types of materials utilized) |
| Max Applicable Fat of Material | 4000 Kg (CZPTizable) |
| Rated Frequency | 50Hz & 60Hz |
| 定格電圧 | 380V,415V, 440V, 460V, 480V,or Dual-Voltage (CZPTizable) |
| Unwinding/Rewinding Shaft | Shaftless unwinder & Pneumatic Air Growing Shaft |
| General Proportions | 2000 x 2500 x 1500mm |
| 過剰な体重 | 4000kg |
| Environmental Restriction | |
| 位置 | Indoor. The product ought to be installed on flat and strong foundation. |
| Voltage Regulation | ±10% |
| Frequency Regulation | ±5% |
| Ambient Temperature | -5°C~40°C |
| 高度 | Not exceed a thousand Meters |
| 相対湿度 | Less than 85% RH (Non-Condensation) |
| コンポーネント | |
| Unwinding Section | -Shaftless unwinder,the cam dimension is 3”&6” -CZPT automatic raise-up loading system -Tech Mach analog EPC from Usa -RE Brake from Italy -Tech Mach Floating roller continual stress from United states of america -Tech Mach Sensor from United states of america -Self expandable chuck -Xihu (West Lake) Dis. & Slide AMT from ZheJiang |
| Slitting Area | -Alternatives of Razor cutter or Disc cutter -Disc Cutter Assembly undertake the cam self-locking -Cutter with adjustable and moveable blade foundation. -Meter counter |
| Rewinding Area | -three”air expanding rewinding corelessshafts -Middle Rewinding engineering -Force roller -Electromagnetic Clutch from ZheJiang |
| Managing Segment | -Siemens PLC & HMI from Germany -All the parametersare exhibited on the monitor -Minimal voltage electrical appliances all from Schneider |
| Trimmed Squander Edge | -Edge Waste Blower with Expulsion Tube |
| オプション | -Friction Differential Shaft for rewinding. -Safety guard for the slitting device. -Crisis Switches on the 4 corner of device. |
| Configuration | |||
| タイトル | モデル | Items | Remark |
| Computer Method | PLC(Siemens)+4DA+7”Touch Monitor(ZheJiang )+ Synchronic(Korea) | 1Set | Siemens+ Weinview |
| モーター | 2 Sets | FUKUTA From ZheJiang | |
| 周波数インバーター | two Sets | YASKAWA From Japan | |
| Upper/Lower Round Knife | ten Sets | Jota CZPT | |
| Brake | RE Brake from Italy | ||
| Sensor | 2 Sets | Tech Mach Sensor from Usa | |
| Pressure management | three Sets | Tech Mach Floating roller continual stress from United states | |
| EPC | one Established | Tech Mach analog from United states of america | |
| Chuck | Self expandable chuck | one Established | From ZheJiang |
| Photocell Monitoring | two Set | SIKC From Germany | |
| Magnetic Clutch | two Sets | From ZheJiang | |
| Low Voltage CZPTal Change | SCHNEIDER | ||
| Blower | one Set | 中国 | |
メンテナンスガイド — チェーンの潤滑 オートバイのチェーンに潤滑油を塗布する方法 ステップバイステップガイド 正しい…
ハウツーガイド — チェーンの張力 オートバイのチェーンの張力を調整する方法 ステップバイステップガイド チェーンの張力…