Toote kirjeldus
CM490 CM690 Grade U1 U2 U3 Stud/Studless Anchor Chain With Certificate 30 Years Chain Factory
| STUD LINK ANCHOR CHAIN,LINK SIZE(6×3.6D),TEST LOAD AND WEIGHT | ||||||||||
| D(Φ) DIAMETER | CHAIN LINK SIZE | AM1 U1 STUD LINK CHAIN | AM2 U2 STUD LINK CHAIN | AM3 U3 STUD LINK CHAIN | APPROX. WEIGHT | |||||
| OUTSIDE LENGTH | OUTSIDE WIDTH | PROOF LOAD | BREAKING LOAD | PROOF LOAD | BREAKING LOAD | PROOF LOAD | BREAKING LOAD | 27.5M | ||
| INCH | MM | MM | MM | MM | KN | KN | KN | KN | KN | KG |
| 1/2 | 12.5 | 75 | 45 | 46 | 66 | 66 | 92 | 92 | 132 | 98.00 |
| 9/16 | 14 | 84 | 50.4 | 58 | 82 | 82 | 116 | 116 | 165 | 119.00 |
| 5/8 | 16 | 96 | 57.6 | 76 | 107 | 107 | 150 | 150 | 216 | 156.00 |
| 11/16 | 17.5 | 105 | 63 | 89 | 127 | 127 | 179 | 179 | 256 | 186.00 |
| 3/4 | 19 | 114 | 68.4 | 105 | 150 | 150 | 211 | 211 | 301 | 230.00 |
| 13/16 | 20.5 | 123 | 73.8 | 123 | 175 | 175 | 244 | 244 | 349 | 260.00 |
| 7/8 | 22 | 132 | 79.2 | 140 | 200 | 200 | 280 | 280 | 401 | 300.00 |
| 15/16 | 24 | 144 | 86.4 | 167 | 237 | 237 | 332 | 332 | 476 | 370.00 |
| 1-1/16 | 26 | 156 | 93.6 | 194 | 278 | 278 | 389 | 389 | 556 | 431.00 |
| 1-1/8 | 28 | 168 | 100.8 | 225 | 321 | 321 | 449 | 449 | 642 | 496.00 |
| 1-3/16 | 30 | 180 | 108 | 257 | 368 | 368 | 514 | 514 | 735 | 564.00 |
| 1-1/4 | 32 | 192 | 115.2 | 291 | 417 | 417 | 583 | 583 | 833 | 635.00 |
| 1-5/16 | 34 | 204 | 122.4 | 328 | 468 | 468 | 655 | 655 | 937 | 712.00 |
| 1-7/16 | 36 | 216 | 129.6 | 366 | 523 | 523 | 732 | 732 | 1050 | 800.00 |
| 1-1/2 | 38 | 228 | 136.8 | 406 | 581 | 581 | 812 | 812 | 1160 | 887.00 |
| 1-9/16 | 40 | 240 | 144 | 448 | 640 | 640 | 896 | 896 | 1280 | 1032.00 |
| 1-5/8 | 42 | 252 | 151.2 | 492 | 703 | 703 | 981 | 981 | 1400 | 1084.00 |
| 1-3/4 | 44 | 264 | 158.4 | 538 | 769 | 769 | 1080 | 1080 | 1540 | 1197.00 |
| 1-13/16 | 46 | 276 | 165.6 | 585 | 837 | 837 | 1170 | 1170 | 1680 | 1310.00 |
| 1-7/8 | 48 | 288 | 172.8 | 635 | 908 | 908 | 1270 | 1270 | 1810 | 1438.00 |
| 2 | 50 | 300 | 180 | 686 | 981 | 981 | 1370 | 1370 | 1960 | 1546.00 |
| 2-1/16 | 52 | 312 | 187.2 | 739 | 1060 | 1060 | 1480 | 1480 | 2110 | 1661.00 |
| 2-1/8 | 54 | 324 | 194.4 | 794 | 1140 | 1140 | 1590 | 1590 | 2270 | 1791.00 |
| 2-3/16 | 56 | 336 | 201.6 | 851 | 1220 | 1220 | 1710 | 1710 | 2430 | 1926.00 |
| 2-5/16 | 58 | 348 | 208.8 | 909 | 1290 | 1290 | 1810 | 1810 | 2600 | 2086.00 |
| 2-3/8 | 60 | 360 | 216 | 969 | 1380 | 1380 | 1940 | 1940 | 2770 | 2249.00 |
| 2-7/16 | 62 | 372 | 223.2 | 1030 | 1470 | 1470 | 2060 | 2060 | 2940 | 2361.00 |
| 2-1/2 | 64 | 384 | 230.4 | 1100 | 1560 | 1560 | 2190 | 2190 | 3130 | 2516.00 |
| 2-9/16 | 66 | 396 | 237.6 | 1160 | 1660 | 1660 | 2310 | 2310 | 330 | 2676.00 |
| 2-11/16 | 68 | 408 | 244.8 | 1230 | 1750 | 1750 | 2450 | 2450 | 3500 | 2885.00 |
| 2-3/4 | 70 | 420 | 252 | 1290 | 1840 | 1840 | 2580 | 2580 | 3690 | 3571.00 |
| MATERIAL:(U1:CM370; U2:CM490; U3:CM690) | ||||||||||
| STUD LINK ANCHOR CHAIN,LINK SIZE(6×3.6D),TEST LOAD AND WEIGHT | ||||||||||
| D(Φ) DIAMETER | CHAIN LINK SIZE | AM1 U1 STUD LINK CHAIN | AM2 U2 STUD LINK CHAIN | AM3 U3 STUD LINK CHAIN | APPROX. WEIGHT | |||||
| OUTSIDE LENGTH | OUTSIDE WIDTH | PROOF LOAD | BREAKING LOAD | PROOF LOAD | BREAKING LOAD | PROOF LOAD | BREAKING LOAD | 27.5M | ||
| INCH | MM | MM | MM | MM | KN | KN | KN | KN | KN | KG |
| 1/2 | 12.5 | 75 | 45 | 28.75 | 57.81 | 41.20 | 82.60 | 56.40 | 112.80 | 85.40 |
| 9/16 | 14 | 84 | 50.4 | 34.78 | 69.93 | 51.00 | 101.90 | 70.76 | 141.51 | 106.55 |
| 5/8 | 16 | 96 | 57.6 | 47.10 | 94.72 | 66.20 | 132.30 | 92.42 | 184.83 | 139.43 |
| 11/16 | 17.5 | 105 | 63 | 56.35 | 113.31 | 78.89 | 157.78 | 110.55 | 221.10 | 178.35 |
| 3/4 | 19 | 114 | 68.4 | 66.42 | 133.57 | 93.60 | 187.20 | 130.32 | 260.64 | 217.68 |
| 13/16 | 20.5 | 123 | 73.8 | 77.33 | 155.49 | 108.64 | 217.27 | 151.70 | 303.42 | 229.14 |
| 7/8 | 22 | 132 | 79.2 | 89.06 | 179.08 | 125.40 | 250.90 | 174.40 | 349.40 | 264.49 |
| 15/16 | 24 | 144 | 86.4 | 105.98 | 213.25 | 149.90 | 298.90 | 207.90 | 415.80 | 341.82 |
| 1-1/16 | 26 | 156 | 93.6 | 124.38 | 250.12 | 175.40 | 350.80 | 244.00 | 488.00 | 369.94 |
| 1-1/8 | 28 | 168 | 100.8 | 144.26 | 290.08 | 203.80 | 406.70 | 283.00 | 566.00 | 427.04 |
| 1-3/16 | 30 | 180 | 108 | 165.60 | 333.00 | 234.20 | 467.50 | 324.90 | 649.80 | 490.98 |
| 1-1/4 | 32 | 192 | 115.2 | 188.42 | 378.88 | 265.60 | 531.20 | 369.60 | 739.30 | 559.65 |
| 1-5/16 | 34 | 204 | 122.4 | 212.70 | 427.72 | 299.90 | 599.80 | 417.30 | 834.60 | 671.52 |
| 1-7/16 | 36 | 216 | 129.6 | 238.46 | 479.52 | 336.10 | 672.30 | 467.80 | 935.70 | 707.85 |
| 1-1/2 | 38 | 228 | 136.8 | 265.70 | 534.28 | 374.40 | 748.70 | 521.30 | 1042.50 | 788.98 |
| 1-9/16 | 40 | 240 | 144 | 294.40 | 592.00 | 414.50 | 829.10 | 577.60 | 1155.20 | 869.36 |
| 1-5/8 | 42 | 252 | 151.2 | 324.58 | 652.68 | 457.70 | 915.30 | 636.80 | 1273.60 | 959.30 |
| 1-3/4 | 44 | 264 | 158.4 | 356.22 | 716.32 | 502.70 | 999.60 | 698.90 | 1398.00 | 1111.25 |
| 1-13/16 | 46 | 276 | 165.6 | 389.34 | 782.92 | 548.80 | 1097.60 | 763.90 | 1527.80 | 1152.07 |
| 1-7/8 | 48 | 288 | 172.8 | 423.94 | 852.48 | 597.80 | 1195.60 | 831.70 | 1663.50 | 1256.26 |
| 2 | 50 | 300 | 180 | 460.00 | 926.09 | 648.80 | 1293.60 | 902.50 | 1805.00 | 1360.41 |
| 2-1/16 | 52 | 312 | 187.2 | 497.54 | 1000.48 | 697.63 | 1395.26 | 976.14 | 1952.28 | 1485.61 |
| 2-1/8 | 54 | 324 | 194.4 | 536.54 | 1078.92 | 752.33 | 1504.66 | 1052.68 | 2105.36 | 1648.08 |
| 2-3/16 | 56 | 336 | 201.6 | 577.02 | 1160.32 | 809.09 | 1618.18 | 1132.10 | 2264.20 | 1715.97 |
| 2-5/16 | 58 | 348 | 208.8 | 618.98 | 1244.68 | 867.91 | 1735.82 | 1214.40 | 2428.80 | 1844.50 |
| 2-3/8 | 60 | 360 | 216 | 662.40 | 1332.00 | 928.80 | 1857.60 | 1299.60 | 2599.20 | 1973.29 |
| 2-7/16 | 62 | 372 | 223.2 | 707.30 | 1422.28 | 991.75 | 1983.50 | 1387.68 | 2775.36 | 2101.56 |
| 2-1/2 | 64 | 384 | 230.4 | 753.66 | 1515.52 | 1056.77 | 2113.54 | 1478.66 | 2957.32 | 2298.47 |
| 2-9/16 | 66 | 396 | 237.6 | 801.50 | 1611.72 | 1123.85 | 2247.70 | 1572.52 | 3145.04 | 2398.10 |
| 2-11/16 | 68 | 408 | 244.8 | 850.82 | 1710.88 | 1192.99 | 2385.98 | 1669.26 | 3338.52 | 2522.88 |
| 2-3/4 | 70 | 420 | 252 | 901.60 | 1813.00 | 1264.20 | 2528.40 | 1768.90 | 3537.80 | 2697.65 |
Meie teenused
1. Prompt reply for inquiry within 24 hours
2. One on one service guarantees you the best purchasing experience.
3. Strong production capacity and professional technical engineer can guarantee the delivery time and quality.
4. Strict quality control.
ZheJiang CZPT chain is a professional manufuacturer which is specialized in producing lifting chain, mining chain,lashing chain,anchor chain, ash handler chain,fishing chain etc..since 1991.
We have certified by ISO 2000 ,and get CE certification, safety certificate of mining products,classification society certification.
Our chains can be exported to overseas markets,such as United States,Japan,Germany,Russia,,Eastern Europe and Southeast Asianountries.
Haiwei chains has 4 producing lines with more than 220 employees.
Our chain’s diameters ranges from 6mm-42mm and grade standard ranges form G30 to CZPT serious which can meet the requirementsof mining, lifting,berthing,strapping,lifting, fishery and other fields.
| Kasutamine: | Ülekandekett, lohistuskett, konveierikett, spetsiaalne spetsiaalne kett |
|---|---|
| Materjal: | Sulam |
| Pinnatöötlus: | Baking Paint |
| Funktsioon: | Kuumuskindel |
| Keti suurus: | D3mm-D68mm, G30-G100 |
| Struktuur: | Welded Chain |
| Proovid: | US$ 5/Piece 1 tükk (minimaalne tellimus) | |
|---|
| Kohandamine: | Saadaval | Kohandatud päring |
|---|
Veokettide eelised ja puudused
Drive chains are widely used for sliding steel guides. While solution chains are often used, roller chains are more efficient in size and weight. Nevertheless, a drive chain is often the best choice for dirty jobs. The following are some of the benefits and disadvantages of drive chains. Learn more! Adapt your vehicle to your specific situation with drive chains. You’ll be glad you did! Read on to learn more! Continue reading for information on different types of drive chains.
Pööratud hammaskett
Pööratud hammastega nukkvõlli ajamiketil on lülidel hambad ja kaks tihvtiga veerevat pöördliigendit, mis haakuvad üksteisega, et edastada mõõdukat kuni suurt pöörlemiskiirust. Seda tüüpi ajamiketti tuntakse ka vaikse ketiülekandena, mis on eriti tõhus müra ja vibratsiooni vähendamisel. Lüliti hambad sobivad ideaalselt hammasratta hammastega. Pööratud hammaste disain tagab ka keti lülide sujuva ühenduse ketiratta hammastega.
The design of the new model was particularly effective in quelling noise. The “Druid” spring forks enabled the chain to adjust with minimal motion of the axle. It was launched at the 1910 Olympia show and sold more than 500 units. The drive chain was also silent, which reduced the need for sound insulation and attenuation components, which in turn minimized weight. Hence, it became an ideal choice for wind turbines.
Kettülekande peamised puudused on väike kiirus ja piiratud ulatus. Selle tootmine on kallis ja see nõuab täpset paigaldamist. Hooldus on hädavajalik, sealhulgas määrimine ja lõtku reguleerimine. Selle kiirus kõigub keti venitamisel. See põhjustab keti rikke kõige ebasobivamal ajal. Kettülekandel on ka libisemisega seotud probleeme. Lisaks võib see olla altid liigsele kulumisele. Õnneks on aga saadaval uuemat tüüpi ülekandekette, mis on vastupidavamad ja töökindlamad.
Duplekskett
Dupleks-ajamikette on kolme tüüpi: SC, RP ja Ramsey. Igal neist on oma unikaalsed eelised ja omadused. Rampoweri dupleks-seeria pakub kaks korda suuremat võimsust kui tavaline SC dupleks-kett. Neid kasutatakse sageli uutes rakendustes. SC dupleks-ketid on kõige soodsamad ja neid kasutatakse vähem nõudlikes rakendustes. SC dupleks-ketil on väiksem võimsus, kuid väiksem kaal. Samuti ei ole jõudlust garanteeritud.
Mitmekiuline rullkett
Mitmekordsete rullkettide turgu veokettide jaoks saab määratleda selle tööstusharu kasvu soodustavate tegurite põhjal. Turu kasvu takistavaid tegureid saab mõista, et leida alternatiivseid võimalusi tulusate võimaluste loomiseks. Selle aruande eesmärk on mõista praegust stsenaariumi ja COVID-19 mõju tööstusharule tervikuna. Samuti arutame turu liikumapanevaid ja piiranguid. Arutame erinevat tüüpi mitmekordseid rullkette veokettide jaoks ja nende turu suurust lähiaastatel.
The minimum tensile strength for a roller chain is one sixth or one-ninth the tensile strength of a conventional drive chain. These standards are established to prevent linkplate fatigue, which is the main cause of premature breakdown. A chain made of this material is considered a superior choice for high-performance applications involving a high load-bearing capacity. If you’re using a drive chain, make sure to choose a proper chain based on the type of application. A simple chain with a high load-bearing capacity is also ideal for simple applications.
Kuigi on tõsi, et kõrge pingega ja kiire ajam vajab suuremat võimsust kui madala kiirusega kett, kasutatakse rullkette peamiselt madala ja keskmise kiirusega rakendustes. Need sarnanevad jalgrattakettidega, kuid neil võib olla pealüli. Mootorratastel on ketid raskemad ja nende eemaldamiseks võib vaja minna ketitööriista. Need ketid asendatakse sageli hammasrihmadega või mõlema kombinatsiooniga.
Lameda ülaosaga kett
The flat top drive chain is a versatile conveyor belt that conveys medium and large workpiece pallets. Its arcing capacity makes it suitable for continuous drive combinations involving curve arcs. The flat top chain is also available with PA wear pads on the workpiece pallets. The flat top chain’s steel and plastic glide profiles allow surface loads of up to 1.5 kg/cm. HD profiles are compatible with the flat top chain.
Terasest lameda ülaosaga ketid on saadaval mitut tüüpi: 815, 820 ja 881 seeria. Need on kuumtöödeldud, et saavutada kõrge tugevus ja suurepärane kulumiskindlus. Neid saab kasutada ka erinevate ketiratastega, sealhulgas 820 ketiratastega. Kvaliteetset terasest ketti saab kasutada paljudes tööstuslikes rakendustes. Kui aga otsite oma tööstuslikuks rakenduseks vastupidavat ketti, on IWIs karastatud roostevabast terasest lameda ülaosaga ketid suurepärane valik.
TSplus lameda ülaosaga veokatel on kõigist konveierimaterjalidest suurim paindlikkus. Ajamiüksusi saab ots otsaga ühendada, et moodustada pikki konveieriliine. Külgpainduvad lameda ülaosaga ketid on saadaval looklevate, reas olevate ja karussellkonveierite loomiseks. Ajamiüksused on saadaval standardsete ja vastupidavate mudelitena. Need on piisavalt mitmekülgsed, et hakkama saada erineva suurusega konteineritega. Kui vajate keerukamat konveierisüsteemi, saate valida vastupidava veokate.
Rexnordi lameda ülaosaga ketid on saadaval kahes põhitüübis: MatTop kett ja TableTop kett. TableTop kett on vormitud standardlaiustes vahemikus 3,25 tolli kuni 12 tolli. Neid tarnitakse kümne jala (1,5 meetri) pikkuste osadena, kuid saadaval on ka 20 jala (6 meetri) laiused mattop ketid. Saate oma MatTop ketti isegi oma täpsetele vajadustele vastavaks kohandada. Need sobivad ideaalselt mitmesugusteks transpordirakendusteks, alates üldisest transpordist kuni loputusrakendusteni.
Konveieri kett
Konveierite ajamiketid on saadaval mitmesugustes stiilides. Nendel kettidel võib olla erinev samm. Sammu määravad ratta hammaste tugevus, keti üldine jäikus ja ajamimootori tüüp. Tavaline maksimaalne samm määratakse lüliplaatide laiuse ja kinnitusnurkade vahelise nurga järgi. Keti sammu saab suurendada, tugevdades lüliplaatide vahelisi pukse. Veenduge, et ratta hammaste ja pukside vaheline vahe oleks umbes üks veerand tolli.
Keti valimisel on olulised kaalutlused keti samm ja pinge. Minimaalse sammu määrab ratta hamba paksus ja maksimaalse sammu lüliplaatide jäikus. Seda maksimaalset sammu võib aga ületada lüliplaatide vaheliste pukside või ratta hammastega kauguse korral. Kvaliteetsel ketil on laagripinnad määritud, et vältida liigset kulumist ja roostetamist. Tavapäraste töötingimuste jaoks sobib keskmise viskoossusega mineraalõli. Selleks otstarbeks on hea valik SAE 20W-50. Iseõlitavaid kette pakuvad paljud ketitootjad.
The chain is usually lubricated by dripping oil between the links. This type of lubrication requires regular inspection of the conveyor chain. The amount of oil should be enough to prevent reddish brown discoloration on the chain joints. A lubricating oil should be applied on a daily basis, according to the manufacturer’s specifications. In order to ensure a longer life for your drive chain, make sure that you lubricate it on a regular basis.
editor by CX