High Torque Low Rpm Planetary Gear Motor 56mm 12V

Higher Torque Low Rpm Planetary Equipment Motor 56mm 12V

 Conocimientos sobre cajas de cambios:

Cantidad de etapas	reducción de 1 etapa	2 levels reduction	reducción de tres fases	four levels reduction	5 phases reduction
Relación de reducción	three.seven,5.two	13.seven,19.2,26.9	50.nine,seventy one.two,99.five,139	188,264,369,516,721	669,977,1367,1911,2672,3736,
gearbox size ” L” mm	26.4	32.6	38.9	45.three	52.5
Par máximo de funcionamiento	three.0Kgf · cm	six.0Kgf · cm	eight.0Kgf · cm	12.0Kgf · cm	20Kgf · cm
Max. Equipment breaking torque	nine.0Kgf · cm	eighteen.0Kgf · cm	24Kgf · cm	36Kgf · cm	60Kgf · cm
Max. Gearing efficiency	noventa y un TP3T	ochenta y uno%	73%	65%	cincuenta y nueve%

Motor info:
 

Motor name	Voltaje nominal	Sin carga		par de carga				par de calado
		Reciente	Paso	Actual	Velocidad	Esfuerzo de torsión	Potencia de salida	Esfuerzo de torsión	Actual
		mamá	r/min	mamá	r/min	gf · cm	W	gf · cm	mamá
TG-38123400	doce	≤40	3400	≤180	2500	40	1.	ciento sesenta	720
TG-38124500	doce	≤50	4500	≤350	3300	sesenta	2.	210	1400
TG-38126000	12	≤70	6000	≤720	4500	ochenta	tres.6	300	2800
TG-38243000	24	≤15	3000	≤80	2200	40	.9	ciento cuarenta	320
TG-38244500	24	≤25	4500	≤180	3300	60	dos.	200	730
TG-38246700	24	≤45	6700	≤360	4500	80	tres.6	trescientos	1400
1,This table lists some motors parameters, other individuals make sure you refer to particular parameters of tg-38-one.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X        gearing efficiencyoutput velocity:motor speed / reduction ratio.

Notice:

 1, Gearmotor named methods: e . g . PG36M528123000-99.5K    Motor please refer to the motor information TG-38123000.
          Gearbox please refer to gearbox info reduction ratio99.five .Relevant to gearmotor output velocity and torque please
          refer to motor info.
   2, Motor can be mounted wiht magnetic encorder. encorder parameters you should refer to me-32.htm.
   3,CZPT output shaft after lowering: dia8.0mm. other measurements of then output shaft can make as client request.
   4,Chart only for reference,items shall prevail the entity.

Firm Introduction