16mm micro planetary equipment motor
PG16M050 Series
Dia:Ø16×(42.9~53.nine)mm
Rated torque:1kg.cm~4kg.cm
Keterangan
Solution description
| Solution title | PG16050 sequence,16mm diameter earth equipment motor |
| Motor kind | carbon-brush commutator |
| Equipment kind | Straight gearwheel planet gearhead |
| Housing content | Baja |
| Geartrain substance | Metal , Powdered Metal |
| CZPT at output shaft | Sleeve bearing |
| Lubricant | Grease for higher-low temperature |
| Axial play | <0.3mm |
| Radial enjoy | <0.05mm(5mm from mounting face) |
| Rotation direction | CW/CCW reversible |
| Backlash at no-load | <1° |
| Working temperature range | -forty °C~+100°C |
| Noise (DB) | <55DB measured at 30cm distance |
| Lifetime | 1000+ several hours (may differ by software) |
| OEM & ODM Provider | Tersedia |
| Sertifikasi | CE,ROHS,SGS,TUV,IATF16949 |
Packing and shipping and delivery
Rapidly shipping Day : 1-2 weeks for samples, 3-4 weeks for mass generation.
*shockproof foam packing
*50 pcs every layer
*3 layers each carton
*carton meas.:30*28*13cm
*150pcs/ctn
*N.W.:12kgs
*G.W.:11.2kgs
*recycled wooden pallet
*stretch movie
*binding tape
*Shipping mark on every single carton and pallet
Sertifikasi
Pertanyaan yang Sering Diajukan (FAQ)
Q:one.What kind of motors you can give?
A: For now, we primarily supply long term magnet brushed dc motors (such as vibration motors, low voltage dc motors and high voltage dc motors) with diameter assortment in 6~80mm and also Dia10~80mm dimension equipment motors.
Q:two. Can you send me a cost list?
A: For all of our motors, they are CZPT based mostly on different specifications like lifetime, noise, voltage, and shaft and so on. The price tag also differs according to once-a-year quantity. So it is genuinely difficult for us to offer a price tag checklist. If you can share your detailed demands and annual quantity, we’ll see what offer we can give.
Q:3. What is actually the guide time for standard get?
A: For orders, the standard direct time is 35-40 days and this time can be shorter or longer based mostly on various design, time period and amount.
Q:4. Is it possible for you to produce new motors if we can provide tooling price?
A: Yes. You should kindly share the thorough demands like efficiency, dimensions, annual quantity, focus on price tag etc. Then we will make our evaluation to see if we can set up or not.
Q:5. Can I get some samples?
A: It depends. If only a number of samples for private use or substitute, I am concerned it’s going to be hard for us to provide due to the fact all of our motors are custom created and no stock CZPT if there is no more demands. If just sample testing ahead of the official get and our MOQ, cost and other phrases are satisfactory, we might enjoy to provide samples.
