60W Brushless DC Gear Motors
Basic Qualities Of Motor
•60W (DC Power Provide When Used To 24VDC/36VDC/48VDC)
|
Rated electricity (Continuous) |
W |
60 (40W/60W) |
|||
|
Rated velocity |
r/min |
2500 |
|||
|
Torsi terukur |
Nm |
.230 |
|||
|
Instantaneous highest torque |
Nm |
.345 |
|||
|
Rotor moment of inertia |
J:X10-fourkg.m2 |
.082 |
|||
|
Speed manage range |
RPM |
Large stress two hundred-2500RPM (Lower pressure 200-3000RPM) |
|||
|
Pace control assortment |
On load |
Underneath ±1%: problem ~ rated torque, rated pace, rated voltage, room temperature |
|||
|
On voltage |
Below±1%: problem rated voltage ±10%, rated pace, rated load, area temperature |
||||
|
On temperature |
Below±1%: Conditions of ambient temperature ~+40°C rated voltage, rated load and rated speed |
||||
|
Electricity input |
Tegangan nominal |
V |
Solitary period 110V |
One stage 220V |
24VDC(Optional 36VDC/48VDC) |
|
Voltage tolerance range |
±10% |
||||
|
Frequency |
HZ |
50/60 |
/ |
||
|
Frequency tolerance assortment |
±5% |
/ |
|||
|
Rated enter existing |
A |
1.seven |
1. |
three.seven |
|
|
Instantaneous maximum input current |
A |
3.3 |
satu.sembilan |
5. enam |
|
Deskripsi Produk
Circular Shaft Sort Optical Motor
•Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/48/a hundred and ten/220
•Z4BLD60-24GN-30S(4GN5K) Diagram (ZD CZPT Push)
•Reduced Voltage Wrie Plughole Corresp-onding Signal Clarification
|
plughole |
1 |
2 |
3 |
empat |
|
signal |
U |
W |
Hv |
Hu |
|
plughole |
5 |
enam |
tujuh |
delapan |
|
signal |
V |
GND |
Hw |
Vcc |
•Large Voltage Wrie Plughole Corresp-onding Sign Rationalization
| Corresponding that means | |||||||||
|
satu |
2 |
tiga |
4 |
5 |
6 |
7 |
8 |
sembilan |
sepuluh |
|
Blue (coarse) |
Yellow (good) |
Yellow (coarse) |
Eco-friendly (wonderful) |
Inexperienced (coarse) |
Blue (good) |
|
Steel mesh |
Purple (fine) |
Black (fantastic) |
|
W |
Hu |
U |
Hv |
V |
Hw |
|
|
Vcc+5V |
GND |
•Parallel Shaft Velocity Reducer
Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Value
1.Connector:5557-8R/10R(MOLEX) 2.The sheath size of lead line 300mm 3.Spherical terminal:SRA-21T-4(Minimal floor)
•Decimal Gearhead
4GN()XK-10 Velocity Ratio Price, CZPTly ten
|
Gearhead Product |
Rasio Peralatan |
L Dimension |
|
4GN()K |
3-18 |
32&43.5 |
|
twenty~200 |
forty three.five |
•Enter the gear ratio in the box () within the model title
•Z4BLD60-24GN-30S(4GN5K) Equipment Allowable Torque (Unit: N.m)
|
Produk |
Motor Velocity/Reduction Ratio |
tiga |
tiga. enam |
lima |
enam |
7.5 |
sembilan |
10 |
dua belas.5 |
limabelas |
18 |
20 |
dua puluh lima |
30 |
36 |
50 |
60 |
tujuh puluh lima |
90 |
seratus |
seratus dua puluh |
150 |
seratus delapan puluh |
dua ratus |
|
|
two hundred~1500RPM |
.seventy two |
.87 |
1.21 |
1.45 |
one.81 |
2.17 |
2.forty one |
3.02 |
three.62 |
four.34 |
4.35 |
5.forty four |
six.fifty three |
seven.eighty three |
eight.00 |
8.00 |
8.00 |
8.00 |
8.00 |
8.00 |
eight.00 |
eight.00 |
8.00 |
|
Z4BLD60-()GN |
2000 RPM |
.70 |
.84 |
one.16 |
one.39 |
one.seventy four |
two.09 |
2.32 |
two.90 |
3.forty eight |
4.eighteen |
four.sixty four |
5.23 |
six.27 |
seven.fifty two |
eight.00 |
8.00 |
8.00 |
eight.00 |
eight.00 |
8.00 |
eight.00 |
eight.00 |
eight.00 |
|
|
2500RPM |
.56 |
.sixty seven |
.93 |
one.eleven |
1.39 |
one.sixty seven |
one.86 |
two.32 |
2.78 |
three.34 |
3.seventy one |
4.18 |
five.02 |
six.02 |
eight.00 |
eight.00 |
8.00 |
eight.00 |
8.00 |
8.00 |
8.00 |
eight.00 |
eight.00 |
Note :The() (grey) in the table signifies that the rotation path is regular with the motor.(The torque underneath different pace and pace ratio is received beneath the ZD normal.)
•L Sort Pace Reducer
•Z4BLD60-24GN-30S(4GN5K) Device Allowable Torque (Device: N.m)
|
Motor Pace/Reduction Ratio |
lima |
10 |
limabelas |
dua puluh |
tigapuluh |
lima puluh |
seratus |
dua ratus |
|
two hundred~1500RPM |
1.21 |
two.41 |
three.sixty two |
four.eighty three |
6.53 |
10.nine |
21.8 |
39.3 |
|
2000 RPM |
one.02 |
two.04 |
3.06 |
4.08 |
5.fifty two |
nine.twenty |
18.4 |
33.tiga |
|
2500RPM |
.83 |
1.sixty seven |
two.fifty one |
three.35 |
5.02 |
eight.37 |
16.seven |
30.3 |
Observe :All gearbox output switch route in kind are opposite as motor flip route.(The torque below various speed and pace ratio is received under the ZD common.)
Firm Data
Pertanyaan yang Sering Diajukan (FAQ)
Q: What’re your primary products?
A: We presently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Equipment Box etc. You can check out the technical specs for over motors on our web site and you can electronic mail us to advise necessary motors per your specification way too.
Q: How to pick a ideal motor?
A:If you have motor photographs or drawings to demonstrate us, or you have comprehensive specs like voltage, speed, torque, motor size, functioning mode of the motor, essential life time and noise degree and so forth, you should do not wait to permit us know, then we can suggest suited motor for every your ask for accordingly.
Q: Do you have a CZPT services for your regular motors?
A: Of course, we can customize per your ask for for the voltage, pace, torque and shaft dimension/form. If you want additional wires/cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it way too.
Q: Do you have an person style provider for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mildew establishing price and design demand.
Q: What is actually your guide time?
A: CZPTly talking, our normal regular item will need to have 15-30days, a bit more time for CZPT items. But we are really flexible on the lead time, it will depend on the certain orders.
You should contact us if you have detailed requests, thank you !
