उत्पाद वर्णन
AS/NZS 4344 G70 Transport Chain & Fittings & Load Binders – G70 Chain CZPT Rigging Supplier
Standard: Ordinary mild steel link chain
USA standard link chain
Japan standard link chain
Korea standard link chain
German standard link chain
DIN5685 A/C short/ long chain, DIN766, 763, 764
Short link chain, medium link chain, Long link chain
Contorted chain, Knotwork chain, single/double buckle chain
High tensile chain, transport chain
GRADE: G30, 43, 50, 80.
Our products include,
1. Rigging hardware (shackle, turnbuckle, eye bolt & nuts, carbine hook & snap hook, quick links, hooks, swivel & rings)
2. CZPT & G100 rigging(G80 & G100 chain sling, g100 alloy fittings, CZPT alloy hooks, CZPT alloy links & rings, g80&g100 alloy chain, CZPT alloy master link, CZPT alloy swivels, bolt& nuts)
3. Synthetic lifting sling & harness(Webbing sling, webbing sling endless type, round sling, webbing net, safety harness & safety belt)
4. Cargo control & Transport products (ratchet tie down, ratchet buckle & end fittings, cargo control product, G70 chain & fittings, load binder, bungee cords & plastic straps, cargo bar & jack bars, shoring bars, cargo lock, plank & decking beam)
5. Chains And Accessories
6. Stainless steel rigging (stainless steel shackles, stainless steel turnbuckles, stainless steel wire rope thimbles, stainless steel wire rope clips, stainless steel hooks, stainless steel swivels, stainless steel rings, stainless steel rings, stainless steel bolts & nuts, stainless steel chains, stainless steel wire rope)
7. Manual hoist & lifting equipments(chain hoist, lever hoist, electric chain hoist, electric trolley, electric wire rope hoist, electric winch, wire rope pulling hoist, push & geared travel trolley, beam clamp, lifting clamp, trolley clamp, snatch block, permanent magnetic lifter, crane scale)
8. Marine hardware (anchor, anchor chain, accessories, marine rope)
| Item No. | Nominal Size | WLL | वज़न |
| d x t (mm) | (kg) | (kg/m) | |
| YF8AC04 | 4 x 12 | 500 | 0.35 |
| YF8AC06 | 6 X 18 | 1120 | 0.8 |
| YF8AC08 | 8 X 24 | 2000 | 1.4 |
| YF8AC10 | 10×30 | 3150 | 2.2 |
| YF8AC13 | 13×39 | 5300 | 3.8 |
| YF8AC16 | 16×48 | 8000 | 5.7 |
| YF8AC20 | 20×60 | 12500 | 8.6 |
| YF8AC22 | 22×66 | 15000 | 10.2 |
| YF8AC26 | 26×78 | 21200 | 14.87 |
| YF8AC32 | 32×96 | 31500 | 22.29 |
विशेषताएँ
Company Information
HangZhou CZPT Rigging Co., Ltd. is located in HangZhou, China. For many years supplies a range of industrial products that covers lifting, lashing, slings, rigging, marine, mining, towing, transportation, construction, fishing and security applications…We provide not only high quality goods but also more additional benefits for our clients and partners.
With advanced production equipment, superb manufacturing process, strict management and with good quality product, we have gotten the certificate of ISO9001, CE, GS.
Under our business ideas “Quality first, Customer first”, our goods are sold better and better. Now we are exporting more than 120 countries and areas all over the world. Our annual output is more than 100 million US DOLLAR.
Facing the market, our company will rely on a strong unity, forge ahead with determination and a leadership and workforce to meet the challenge, in fierce competition in the market ahead waves. YANFEI will be your best business partner.
What We Have
· China Leading Rigging Hardware And Producing Technology
· Big Production Ability
· Fast Delivery
· Super High Quality
· Competitive Price
· Ten Years’ Export Experience
· Excellent Sale and After-sale Service
· OEM Available
अक्सर पूछे जाने वाले प्रश्न
1.Can I be your agent?
Yes, welcome to deep cooperation. We have big promotion of CZPT brand in the market now. For the details please contact with our overseas manager.
2.Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3.Is the sample available?
Yes, samples are available for you to test the quality.
4.Are the products tested before shipping?
Yes, all of our products was qualified before shipping.
5.What’s your quality guarantee?
We have different kinds of products which can meet different quality standard.
YANFEI QC department will test products before shipping. We have 100% quality guarantee to customers. We will be responsible for any quality problem.
6.What’s benefit will you bring?
Your client satisfied on the quality.
Your client continued orders.
Your can get good reputation from your market and obtain more orders.
YANFEI super high quality products will bring you success business.
CONTACT
| उपयोग: | Transmission Chain, Drag Chain, Conveyor Chain, Dedicated Special Chain, Transportation Chain, Transmission Chain |
|---|---|
| सामग्री: | मिश्र धातु |
| सतह का उपचार: | विद्युत |
| विशेषता: | प्रतिरोधी गर्मी |
| चेन का आकार: | 1/2"*11/128" |
| संरचना: | Welded Chain |
| उदाहरण: | US$ 100/Piece 1 पीस (न्यूनतम ऑर्डर) | |
|---|
| अनुकूलन: | उपलब्ध | अनुकूलित अनुरोध |
|---|
रोलर चेन की मूल बातें
Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
रोलर स्प्रोकेट
If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
सही स्प्रोकेट का चुनाव करते समय स्प्रोकेट का व्यास महत्वपूर्ण होता है। बिना दांत वाली प्लेट का व्यास मापने के लिए कैलिपर का उपयोग करना स्प्रोकेट का सटीक आकार निर्धारित करने का एक अच्छा तरीका है। कैलिपर बिना दांत वाली प्लेट का व्यास मापता है। टाइप B और C स्प्रोकेट में, हब का व्यास हब की मोटाई को दर्शाता है।
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
स्पॉकेट खरीदते समय यह याद रखना महत्वपूर्ण है कि वे विशेष रूप से एक विशिष्ट चेन के लिए डिज़ाइन किए गए हैं। सभी चेन विशिष्ट मानकों के अनुसार निर्मित होती हैं। संयुक्त राज्य अमेरिका में, सबसे आम मानक ANSI है। चेन पिच प्रत्येक पिन के केंद्र और अगले पिन के केंद्र के बीच की दूरी है। अमेरिका में, मानक हमेशा आठ इंच के अंतराल में मापा जाता है।
स्प्रोकेट के आकार के अलावा, स्प्रोकेट पिच और सतह क्षेत्र भी चेन की आयु को प्रभावित करते हैं। बेल्ट स्प्रोकेट, जो जाली स्टील से बने होते हैं, के विपरीत, रोलर स्प्रोकेट के दांत स्टील शीट से ढाले जाते हैं या धातु के पाउडर से दबाकर बनाए जाते हैं। दांत जितने कठोर होंगे, चेन उतनी ही अधिक समय तक चलेगी।
रोलर चेन पिच
रोलर चेन की पिच, स्प्रोकेट और पिन के बीच की दूरी होती है। थ्रेड पिच जितनी कम होगी, बुशिंग का घिसाव उतना ही कम होगा। सामान्य तौर पर, पिच जितनी कम होगी, चेन की उम्र उतनी ही अधिक होगी। सर्वोत्तम प्रदर्शन और सबसे लंबी उम्र के लिए, निर्माता कम से कम 2% से 3% की चेन पिच की सलाह देते हैं। चेन पिच उचित प्रदर्शन सुनिश्चित करने के लिए महत्वपूर्ण है, और निर्माता सलाह देते हैं कि जब चेन की पिच सामान्य 2% से 3% तक पहुँच जाए तो उसे बदल दें।
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
स्पॉकेट का साइज़ तय करते समय, कैलिपर से गियर के बीच की चेन की लंबाई मापें और चेन साइज़ चार्ट पर दिए गए मापों से तुलना करें। सुनिश्चित करें कि आपने सभी स्पेसिफिकेशन्स और सही चेन पिच की जाँच कर ली है। फिर, अपनी ज़रूरतों के अनुसार सही चेन पिच चुनें। सही चेन चुनने में यह एक महत्वपूर्ण कदम है। इसलिए, अपनी रोलर चेन के लिए सही पिच चुनें। सही पिच अधिकतम परफॉर्मेंस और सुरक्षा सुनिश्चित करने में मदद करती है।
किसी खास तरह की रोलर चेन की पहचान करने के लिए, उसकी तन्यता शक्ति (टेन्साइल स्ट्रेंथ) मापें। इससे पता चलता है कि चेन टूटने से पहले कितना भार सहन कर सकती है। एक और महत्वपूर्ण मापदंड है थकान शक्ति (फटीग स्ट्रेंथ)। उच्च थकान शक्ति वाली चेन कम थकान शक्ति वाली चेन की तुलना में जंग और घिसाव के प्रति अधिक प्रतिरोधी होती हैं। मानक नंबरिंग में दाईं ओर के अंक सामान्य या हल्के काम वाली चेन को दर्शाते हैं, जबकि बाईं ओर के अंक भारी काम वाली चेन की पिच को दर्शाते हैं।
डबल पिच रोलर चेन, सिंगल पिच चेन का ही एक प्रकार है। इनका निर्माण ISO 606 मानकों के अनुसार किया जाता है और ये सिंगल पिच चेन के समान मानकों को पूरा करती हैं। इनका उपयोग मुख्य रूप से उन अनुप्रयोगों में किया जाता है जहाँ गति और शक्ति संचरण की आवश्यकता कम होती है। डबल पिच रोलर चेन की प्लेटें सिंगल पिच चेन की तुलना में लंबी होती हैं। डबल पिच ड्राइव श्रृंखला का उपयोग लिफ्ट और लंबी कन्वेयर ड्राइव में भी किया जाता है। रोलर चेन तीन मुख्य प्रकार की होती हैं: सिंगल-पिच चेन, डबल-पिच कैरियर और ओवरसाइज़्ड रोलर।
रोलर चेन की चौड़ाई
When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
रोलर चेन कई प्रकार की होती हैं। ये चेन ANSI और मीट्रिक माप में उपलब्ध हैं। ये सिंगल-स्ट्रैंड और डबल-स्ट्रैंड वेरिएंट में आती हैं। इनका उपयोग आमतौर पर विद्युत संचरण के लिए किया जाता है। अन्य प्रकारों में कृषि, ऑटोमोटिव, कन्वेयर, मल्टी-स्ट्रैंड और फोर-स्ट्रैंड चेन शामिल हैं। इस चार्ट में एक माप चार्ट भी शामिल है जिससे आप आसानी से अपनी जरूरत के सटीक आकार का पता लगा सकते हैं। रोलर चेन खरीदने के कुछ लाभ नीचे दिए गए हैं।
सही चेन की चौड़ाई चुनने में रोलर का व्यास और पिन का व्यास महत्वपूर्ण कारक हैं। चेन की चौड़ाई 5/8 इंच के निकटतम बाइनरी अंश के बराबर होती है। यह स्प्रोकेट की मोटाई की कम से कम आधी होनी चाहिए, और प्लेट की मोटाई चेन की चौड़ाई का एक-आठवां हिस्सा होती है। अधिक वजन वाली चेन को H प्रत्यय से दर्शाया जाता है। चेन की पिच और चौड़ाई कार्यभार और मशीन की गति द्वारा निर्धारित की जाती है।
रोलर चेन की बाहरी कड़ियों को पिन लिंक कहा जाता है। ये पिन आसन्न रोलर लिंक की बुशिंग में डाली जाती हैं। इन्हें कॉटर पिन द्वारा अपनी जगह पर स्थिर रखा जाता है। पिन लिंक आमतौर पर भारी-भरकम चेन की पिनों में दबाकर लगाई जाती हैं। इन पिनों का उपयोग रोलर्स को अपनी जगह पर स्थिर रखने के लिए किया जाता है। हालांकि, इन पिन लिंक के कारण रोलर चेन की पावर रेटिंग 20% तक कम हो सकती है।
एएनएसआई 29.1 स्टील चेन विनिर्देशन में न्यूनतम पिच इंच में और अधिकतम मजबूती 12,500 x पिच इंच में निर्धारित है। साथ ही, ओ-रिंग चेन अपने चिकनाई प्रभाव के कारण घिसाव को काफी कम करती है। ओ-रिंग और एक्स-रिंग चेन में रिवेटिंग के दौरान वैक्यूम द्वारा एक लुब्रिकेंट डाला जाता है। ट्रांसमिशन चेन का परीक्षण और विनियमन एएनएसआई जैसे मानक निकायों द्वारा किया जाता है। 2011 में, अमेरिकन सोसाइटी ऑफ मैकेनिकल इंजीनियर्स ने सटीक पावर ट्रांसमिशन चेन के लिए एक मानक विकसित किया।
रोलर चेन की तन्यता शक्ति
रोलर चेन की मजबूती के सबसे महत्वपूर्ण संकेतकों में से एक है तन्यता शक्ति। यह माप चेन द्वारा टूटने से पहले सहन किए जा सकने वाले भार की मात्रा को दर्शाता है। थकान शक्ति नामक एक अन्य माप, चेन द्वारा टूटने से पहले सहन किए जा सकने वाले अधिकतम भार को दर्शाता है। रोलर चेन की मजबूती उसके आकार, निर्माण में प्रयुक्त स्टील की गुणवत्ता और ऊष्मा उपचार पर निर्भर करती है। स्टील के उपचार के लिए उपयोग की जाने वाली शॉट पीनिंग के प्रकार, पिच होल और लिंक प्लेट में भी अंतर होते हैं।
रोलर चेन चुनते समय, कार्यभार महत्वपूर्ण होता है। यह वह अधिकतम भार है जिसे चेन थकान के कारण टूटने से पहले सहन कर सकती है। यह माप महत्वपूर्ण है क्योंकि यह चेन पर लगने वाले भार के प्रकार को निर्धारित करने में सहायक होता है। रोलर चेन खरीदते समय, यांत्रिक प्रकार और अपेक्षित मजबूती पर विचार अवश्य करें। फिर, सुनिश्चित करें कि यह मजबूती और भार वहन क्षमता की आवश्यकताओं को पूरा करती हो।
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
एकल-स्ट्रैंड रोलर चेन की तन्यता शक्ति लगभग 500 टन होती है। तुलनात्मक रूप से, एकल-चेन ब्लॉकचेन की तन्यता शक्ति 900 टन होती है। दोनों की तन्यता शक्ति लगभग समान है, इसलिए इनमें से किसी एक को चुनना उचित नहीं है। हालांकि स्टील और टाइटेनियम की चेन को रोलर चेन के लिए सबसे मजबूत सामग्री माना जाता है, लेकिन ये सामग्रियां चुंबकीय नहीं होती हैं।
editor by CX 2023-05-30