60W Brushless DC Gear Motors

Basic Qualities Of Motor

•60W (DC Power Provide When Used To 24VDC/36VDC/48VDC)

Rated electricity (Continuous)		Lääne	60 (40W/60W)
Rated velocity		p/min	2500
Nimipöördemoment		N.m	.230
Instantaneous highest torque		N.m	.345
Rotor moment of inertia		J:X10-fourkg.m2	.082
Speed manage range		Pöörlemiskiirus	Large stress two hundred-2500RPM (Lower pressure 200-3000RPM)
Pace control assortment	On load		Underneath ±1%: problem ~ rated torque, rated pace, rated voltage, room temperature
	On voltage		Below±1%: problem rated voltage ±10%, rated pace, rated load, area temperature
	On temperature		Below±1%: Conditions of ambient temperature ~+40°C rated voltage, rated load and rated speed
Electricity input	Nimipinge	V	Solitary period 110V	One stage 220V	24VDC(Optional 36VDC/48VDC)
	Voltage tolerance range		±10%
	Sagedus	HZ	50/60		/
	Frequency tolerance assortment		±5%		/
	Rated enter existing	A	1.seven	1.	kolm, seitse
	Instantaneous maximum input current	A	3.3	üks.üheksa	5. kuus

Toote kirjeldus

Circular Shaft Sort Optical Motor

•Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/48/a hundred and ten/220

•Z4BLD60-24GN-30S(4GN5K) Diagram (ZD CZPT Push)

•Reduced Voltage Wrie Plughole Corresp-onding Signal Clarification

plughole	1	2	3	neli
signal	U	Lääne	Hv	Hu
plughole	5	kuus	seitse	kaheksa
signal	V	GND	Hw	Vcc

 

•Large Voltage Wrie Plughole Corresp-onding Sign Rationalization

Corresponding that means
üks	2	kolm	4	5	6	7	8	üheksa	kümme
Blue (coarse)	Yellow (good)	Yellow (coarse)	Eco-friendly (wonderful)	Inexperienced (coarse)	Blue (good)		Steel mesh	Purple (fine)	Black (fantastic)
Lääne	Hu	U	Hv	V	Hw			Vcc+5V	GND

 

•Parallel Shaft Velocity Reducer

Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Value

1.Connector:5557-8R/10R(MOLEX) 2.The sheath size of lead line 300mm 3.Spherical terminal:SRA-21T-4(Minimal floor)
 

•Decimal Gearhead

4GN()XK-10 Velocity Ratio Price, CZPTly ten

Gearhead Product	Varustuse suhe	L Dimension
4GN()K	3-18	32&43.5
	twenty~200	forty three.five

•Enter the gear ratio in the box () within the model title

•Z4BLD60-24GN-30S(4GN5K) Equipment Allowable Torque (Unit: N.m)
 

Toode

Motor Velocity/Reduction Ratio

kolm

kolm, kuus

viis

kuus

7. viis

üheksa

10

kaksteist, viis

viisteist

18

20

kakskümmend viis

30

36

50

60

seitsekümmend viis

90

sada

sada kakskümmend

150

sada kaheksakümmend

kakssada

two hundred~1500RPM

.seventy two

.87

1.21

1.45

one.81

2.17

2.forty one

3.02

three.62

four.34

4.35

5.forty four

six.fifty three

seven.eighty three

eight.00

8.00

8.00

8.00

8.00

8.00

eight.00

eight.00

8.00

Z4BLD60-()GN

2000RPM

.70

.84

one.16

one.39

one.seventy four

two.09

2.32

two.90

3.forty eight

4.eighteen

four.sixty four

5.23

six.27

seven.fifty two

eight.00

8.00

8.00

eight.00

eight.00

8.00

eight.00

eight.00

eight.00

2500RPM

.56

.sixty seven

.93

one.eleven

1.39

one.sixty seven

one.86

two.32

2.78

three.34

3.seventy one

4.18

five.02

six.02

eight.00

eight.00

8.00

eight.00

8.00

8.00

8.00

eight.00

eight.00

Note :The() (grey) in the table signifies that the rotation path is regular with the motor.(The torque underneath different pace and pace ratio is received beneath the ZD normal.)

•L Sort Pace Reducer

•Z4BLD60-24GN-30S(4GN5K) Device Allowable Torque (Device: N.m)
 

Motor Pace/Reduction Ratio	viis	10	viisteist	kakskümmend	kolmkümmend	viiskümmend	sada	kakssada
two hundred~1500RPM	1.21	two.41	three.sixty two	four.eighty three	6.53	10.nine	21.8	39.3
2000RPM	one.02	two.04	3.06	4.08	5.fifty two	nine.twenty	18.4	33. kolm
2500RPM	.83	1.sixty seven	two.fifty one	three.35	5.02	eight.37	16.seven	30.3

Observe :All gearbox output switch route in kind are opposite as motor flip route.(The torque below various speed and pace ratio is received under the ZD common.)

Firm Data

KKK
Q: What’re your primary products?
A: We presently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Equipment Box etc. You can check out the technical specs for over motors on our web site and you can electronic mail us to advise necessary motors per your specification way too.

Q: How to pick a ideal motor?
A:If you have motor photographs or drawings to demonstrate us, or you have comprehensive specs like voltage, speed, torque, motor size, functioning mode of the motor, essential life time and noise degree and so forth, you should do not wait to permit us know, then we can suggest suited motor for every your ask for accordingly.

Q: Do you have a CZPT services for your regular motors?
A: Of course, we can customize per your ask for for the voltage, pace, torque and shaft dimension/form. If you want additional wires/cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it way too.

Q: Do you have an person style provider for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mildew establishing price and design demand. 

Q: What is actually your guide time?
A: CZPTly talking, our normal regular item will need to have 15-30days, a bit more time for CZPT items. But we are really flexible on the lead time, it will depend on the certain orders.

You should contact us if you have detailed requests, thank you !