High Torque Low Rpm Planetary Gear Motor 56mm 12V

Higher Torque Low Rpm Planetary Equipment Motor 56mm 12V

 Gearbox knowledge:

Aşama sayısı	1 aşamalı azalma	2 levels reduction	üç aşamalı indirgeme	four levels reduction	5 phases reduction
İndirgeme oranı	three.seven,5.two	13.seven,19.2,26.9	50.nine,seventy one.two,99.five,139	188,264,369,516,721	669,977,1367,1911,2672,3736,
gearbox size ” L” mm	26.4	32.6	38.9	45.three	52.beş
Max.Running torque	three.0Kgf · cm	six.0Kgf · cm	eight.0Kgf · cm	12.0Kgf · cm	20Kgf · cm
Max. Equipment breaking torque	nine.0Kgf · cm	eighteen.0Kgf · cm	24Kgf · cm	36Kgf · cm	60Kgf · cm
Max. Gearing efficiency	doksan%	seksen bir%	73%	65%	fifty nine%

Motor info:
 

Motor name	Nominal voltaj.	Yük yok		Yük torku				Durma torku
		Son	Adımlamak	Akım	Hız	Tork	Çıkış gücü	Tork	Akım
		mA	r/dakika	mA	r/dakika	gf · cm	W	gf · cm	mA
TG-38123400	on iki	≤40	3400	≤180	2500	40	1.	yüz altmış	720
TG-38124500	on iki	≤50	4500	≤350	3300	altmış	2.	210	1400
TG-38126000	12	≤70	6000	≤720	4500	seksen	üç.altı	300	2800
TG-38243000	24	≤15	3000	≤80	2200	40	.9	yüz kırk	320
TG-38244500	24	≤25	4500	≤180	3300	60	iki.	200	730
TG-38246700	24	≤45	6700	≤360	4500	80	üç.altı	üç yüz	1400
1,This table lists some motors parameters, other individuals make sure you refer to particular parameters of tg-38-one.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X        gearing efficiencyoutput velocity:motor speed / reduction ratio.

Notice:

 1, Gearmotor named methods: e . g . PG36M528123000-99.5K    Motor please refer to the motor information TG-38123000.
          Gearbox please refer to gearbox info reduction ratio99.five .Relevant to gearmotor output velocity and torque please
          refer to motor info.
   2, Motor can be mounted wiht magnetic encorder. encorder parameters you should refer to me-32.htm.
   3,CZPT output shaft after lowering: dia8.0mm. other measurements of then output shaft can make as client request.
   4,Chart only for reference,items shall prevail the entity.

Firm Introduction