High Temperature Resistant Viton Fluororubber Heat Shrink Tubing

Viton Fluororubber Warmth Shrink Tubing

Model Amount: SB-RSFR-VT200
Large temperature resistant,oil resistant heat shrink tubing is created of unique developed fluororubber which was cross-linked by radiation with scientific
formula.it has superb overall performance of higher and reduced temperature resistance oil resistance and chemical resistance particularly in shape for the circumstance which need to have oil-resistance(this kind of as plane/motor of automobile,the electrical system and hydraulic program near the oil tank)and chemical solvent resistance,purpose to give insulation safety for the cable bundle and remove the stress,in order to prevent the electric gear from outdoors harm.

Attribut
1. Hold gentle and have no crack in the temperature range of -55ºC~200ºC.
2. Shrink temperature: 100ºC~175ºC.
3. Procedure temperature:-55ºC~200ºC.
four. Shrink Ratio:two:one.

CZPT Information

Hem	Test Technique	CZPT
Tensile toughness(Mpa)	ASTM-D 638	≥8.5Mpa
Breaking elongation	ASTM-D 638	≥250%
Operation temperature selection	IEC 65716	-55ºC~200ºC
Heat getting older/Breaking elongation	168hrs x 250ºC	≥200%
Warmth shock	4hrs x 300ºC	No cracking
Disruptive power	IEC 65713	≥15kV/mm
Quantity resistivity	IEC 60093	1x 10⁹Ω.cm
Flame resistance	UL 224 VW-1	Pass

Mått

Mått		As Equipped	Following CZPTvery		Tubing shape	CZPT Package m/spool
Tum	mm	Inside Diameter (mm)	Internal Diameter	Wall Thickness	Tubing shape	CZPT Package m/spool
three/32	2.fyra	≥2.four	≤1.two	.70±0.twenty	Spherical	tvåhundra
one/8	3.2	≥3.2	≤1.6	.76±0.20	Spherical	tvåhundra
3/sixteen	4.8	≥4.eight	≤2.four	.89±0.20	Runda	hundra
1/4	six.four	≥6.four	≤3.2	.89±0.20	Runda	100
3/8	9.fem	≥9.5	≤4.eight	.89±0.twenty	Flat	femtio
1/two	tolv, sju	≥12.7	≤6.4	.89±0.twenty	Flat	tjugofem
three/4	19.ett	≥19.1	≤9.five	1.07±0.30	Flat	tjugofem
en	25. fyra	≥25.4	≤12.seven	1.25±0.thirty	Flat	25
1-1/2	38.en	≥38.1	≤19.	1.4±0.30	Flat	25
2	50.8	≥50.eight	≤25.4	1.65±0.30	Flat	25

Firm introduction

HangCZPT Sunbow Insulation Materials MFG.Co.,Ltd ,set up in 2003,mainly engaged in the analysis&improvement,manufacture and income of various insulation sleeving.
Our firm has passed CZPT:2008 quality administration method certification in Sep,2009,also we have passed TS16949 automotive method certification in Apr,2016.
Our primary merchandise include fiberglass sleeving,silicone rubber tube,PVC tube,warmth shrink tube,PTFE/FEP tube and so on.
All our fiberglass sleeving experienced been received the UL and CSA certification in 2571(Cert No:E333178–UZIQ2,VW-onefor flame resistance need&E333177–UZFT2/8,300V,600V for thermal resistance necessity)Our heat shrink tube,silicone rubber tube,PTFE tube and PVC gentle tube had been obtained UL certification in 2013(Cert.No.360625)PET Expandable sleeving had been obtained the UL certification in 2017(Cert. No.UZIQ2:E333178).Also all our merchandise are in conformance with the CZPTpean RoHS&REACH requirements.

Stöd
one).Cost-free samples for evaluation
2).Swift generation&quick supply
three).2 a long time top quality promise
four).Prompt response&complex assistance
5).24 several hours online support

Certifiering

avsnitt