Produktbeskrivelse
“H” CLASS Refuse Drag Chains
“H” CLASS Refuse Drag Chains is used for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive waste materials through either wooden or steel troughs. Because of its large, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable carrying capacity when operated at moderate speeds.
CZPT-fladen på hver cylinder er flad, hvilket giver et bredt område til at skubbe materiale langs truget og for at forhindre kæden i at glide over toppen af materialet. Den afrundede inderside af cylinderen er omhyggeligt formet for at give fremragende kontakt med tandhjulet. Sidestængerne er forstærket med slidsko, der giver både...
ekstra slidflade og afstivning af leddet. Et lodret element på hver sidebjælke sikrer øget ledstivhed og beskytter stiften mod skader.
“H”CLASS Refuse Drag Chain is CZPT in HZPT Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This rugged working chain is CZPT in a pitch range of 5.000 to 8.000 inches. Each link is produced in accordance with manufacturer’s standards and may be interchanged with links made by other chain manufacturers. “H”CLASS Refuse Drag Chain is CZPT in riveted construction only. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain operation. CZPT s should always be run in the direction of the closed barrel.
Relateret produkt
Virksomhedsprofil
