Produktbeskrivelse
We Have Following Advantages :
1. Self-design and self-produce
2. Factory direct price
3. Keep product upgrading to meet market demand
4. According to customer’s requirements to control costs and also satisfy the design requirements.
5. Small orders welcome
6. Quick shipping within 10 days
Product Specification
| Item No. | CS01 |
| DC voltage | 24V |
| Batteri | 1.5-4.0Ah |
| No load speed | 6m/s |
| Bar Length | 4″ bar and chain |
| Kædetype | 1/4″(6.35) |
| Max. Cutting Length | 100mm |
| Qty/Ctn | 6pcs |
| Carton Size | 365mm*330mm*285mm |
| N.W./G.W. | 11/12kgs |
| 20′ | 5200pcs |
| 40′ | 11600pcs |
| 40’HC | 13600pcs |
Hovedfunktioner
- High Quality and Efficient – This chain saw adapt high-quality guide chain which has undergone a deep quenching process ensures smooth cutting. The wood tooth design can make the chain saw stuck on the branch, cutting efficiency is higher and faster.
- Easy Operation – This mini chainsaw weight just about 0.7kg and a total length of only 33cm (13inch). Most of the people can easily control and use it, and will not be tired from being too heavy.
- Xihu (West Lake) Dis.nized Design – The integrated guide plate dissipates heat quickly and is very resistant to falling and abrasion. With non-slip handle design, the grip is very comfortable. The chain saw switch can adjust the speed according to the strength, and you can adjust the cutting speed you need according to the operating conditions.
- Efficient Cutting – Power Chain Saws takes about 10 seconds to cut a log with a diameter of 10cm (the specific value varies with the actual size and hardness of the wood). This electric saw is very suitable for trees branches pruning, gardening.Note that it is not suitable for sawing dry planks and wood that is too large
- Easy installation – Just install in a few steps. 1, Install the chain into the guide plate, then install them to chainsaw body. 2, Install the side cover and tighten the nut. 3, Use the wrench in the package to turn the screw to adjust the tightness. Just need 1 Minute for all Install.
HangZhou daguo established in 2019, our factory is 1 of the most professional enterprises in China who specialize in developing and producing garden power tools, located in HangZhou, enjoying ease access to ZheJiang and HangZhou cities. We have domestic CHINAMFG power tool accessories suppliers, such as Xihu (West Lake) Dis.cheng, Gribo, has been maintaining a good long term relationship of cooperation. We gain an outstanding reputation for the sophisticated technology, skillful manufacture and excellent quality of the garden tools. With strong R&D capacity, full productive capacity, and OEM capacity, we are capable of providing customers with superior products and the best service!
Though we are a new power tool manufacturer, Daguo is now a first domestic 4″ bar handled chain saw original design and supplier who has been gained state patent since 2571. Here we would like to introduce Mr. Kin, our technical director who graduated from the mechanical design major with a bachelor′s degree. He is particularly good at product appearance design, internal structure research, product practical performance and cost control.
In 2019, the 4-inch small chainsaw designed by KIN caused a big sensation in the current e-commerce environment and garden tools industry, and it is a hot seller and has been selling very well for long time. Many foreign trade companies want to come in as our appointed agents. At present, we also specialized in power tools, garden tools, such as pruning shears, mini chain saw, electrical trimmer and related in China for professional and DIY users worldwide. Here let us highlight 1 of our best selling products as following:
Now our factory has been already from 240 square CHINAMFG to 1000 square meters, as well as the number of employees has increased from 10 to 40, also we have already passed CE/SGS. At the same time, we are adding more and more machinery and equipment, own close to million fixed assets. We have production capacity of 30 million sets yearly. Our enterprise has been chosen as an “first choice of handled chain saw in HangZhou China”, and has several business partners in this industry.
Ofte stillede spørgsmål
- Customer Questions & Answers
- Q:Are you manufacture?
- A:We are original self-design and self-produce.
- Q: What’s your MOQ?
- A: Our MOQ is 1000 units per model for GTL/OEM brand.
- Q: What’s your payment terms?
- A: We could accept L/C sight, T/T and Paypal.
- Q: What’s the delivery time?
- A: We could deliver the goods within 60 days after order confirmed.
- Q: Is the price on this page your final price?
- A: The price on this page is only for your reference. We hope you can inquiry the bottom price based on your quantity. We also have promotion season and will give discount for new customer.
- Q: How about sample buying?
- A: Yes, we could provide samples and deliver with freight collected.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard: | CE |
|---|---|
| Condition: | Brand New |
| Type: | Motorized Chainsaw |
| Magt: | Electricity |
| Engine Type: | Motor |
| Colour: | Customized |
| Prøver: | US$ 24/Piece 1 stk. (min. ordre) | |
|---|
| Tilpasning: | Tilgængelig | Tilpasset anmodning |
|---|
Hvordan sikrer man korrekt spænding af en motorkæde?
For at sikre korrekt spænding af en motorkæde kan følgende trin følges:
1. Se producentens retningslinjer:
Refer to the manufacturer’s guidelines and specifications for the specific motor chain being used. They often provide recommended tensioning values and procedures.
2. Kontroller startspændingen:
Ensure that the initial tension of the motor chain is set correctly during installation. This involves adjusting the tension to the manufacturer’s specifications based on the chain length and type.
3. Mål afbøjning:
Measure the chain’s deflection to determine if it is within the recommended range. Deflection refers to the amount of vertical movement the chain has when pressure is applied at a specific point.
4. Brug spændingsværktøj:
Brug passende spændeværktøj til at justere motorkædens spænding præcist. Disse værktøjer kan hjælpe med at sikre ensartet og præcis spænding over hele kædens længde.
5. Kontroller justering:
Sørg for, at motorkæden er korrekt justeret i forhold til de tandhjul og remskiver, den interagerer med. Forkert justering kan forårsage ujævn spændingsfordeling og føre til for tidligt slid og potentielt svigt.
6. Regelmæssig inspektion:
Undersøg regelmæssigt motorkæden for tegn på overdreven slitage, strækning eller forlængelse. Hvis der identificeres problemer, skal der træffes passende foranstaltninger, såsom at justere spændingen eller udskifte kæden.
It is important to note that the proper tensioning of a motor chain is crucial for its reliable operation. Improper tension can lead to premature wear, increased noise, and reduced efficiency. Always follow the manufacturer’s recommendations and consult with experienced professionals if necessary.
Hvad er hovedkomponenterne i en motorkæde?
En motorkæde består af flere nøglekomponenter, der arbejder sammen for at overføre kraft og bevægelse. Her er hovedkomponenterne:
1. Plader: Pladerne er de vigtigste lastbærende komponenter i kæden. De er typisk flade metalstykker, der er forbundet sammen for at danne en kontinuerlig løkke. Pladerne giver den styrke og stivhed, der kræves for at håndtere det drejningsmoment og den spænding, der påføres under drift.
2. Stifter: Stifterne fungerer som drejepunkter for at forbinde pladerne. De er cylindriske metalstænger, der går gennem hullerne i pladerne og holder dem sammen, samtidig med at de kan rotere frit. Stifterne er sikkert presset eller nittet ind i pladerne.
3. Bøsninger: Bøsningerne er cylindriske muffer, der indsættes i hullerne i pladerne. De danner en lejeflade for stifterne, hvilket reducerer friktion og slid. Bøsningerne hjælper også med at opretholde korrekt afstand og justering mellem pladerne.
4. Ruller: Nogle motorkæder, især rullekæder, har ruller, der er placeret mellem pladerne. Rullerne giver et jævnt og lavfriktionsindgreb med tandhjulene, hvilket gør det muligt for kæden at overføre kraft og bevægelse jævnt.
5. Nitter: Nitterne bruges til at fastgøre kædens ender sammen og danne en kontinuerlig løkke. De er typisk cylindriske metalstifter, der er spændt eller presset for permanent at forbinde kædens ender.
6. Sideplader: Sidepladerne omslutter kædens sider og giver ekstra støtte og beskyttelse. De hjælper med at forhindre kæden i at afspore og fungerer også som et monteringspunkt til at fastgøre kæden til tandhjulene eller andre komponenter.
Sammen danner disse komponenter en holdbar og pålidelig motorkæde, der er i stand til at overføre kraft og bevægelse effektivt i forskellige applikationer. Komponenternes specifikke design og konfiguration kan variere afhængigt af motorkædens type og størrelse.
Hvad er anvendelserne af motorkæder i forskellige brancher?
Motorkæder, også kendt som kraftoverføringskæder, har en bred vifte af anvendelser i forskellige brancher. Her er nogle almindelige brancher, hvor motorkæder anvendes:
1. Bilindustrien: Motorkæder anvendes i vid udstrækning i bilindustrien til kraftoverførsel i motorer, timingsystemer og andre mekaniske komponenter. De sikrer præcis bevægelseskontrol og synkronisering af motordele.
2. Industrimaskiner: Motorkæder findes i en række forskellige industrimaskiner, herunder transportbånd, materialehåndteringsudstyr, pakkemaskiner, trykpresser og samlebånd. De letter bevægelsen af komponenter og materialer, hvilket sikrer problemfri drift og effektiv produktion.
3. Byggeri og minedrift: Motorkæder bruges i bygge- og minedriftsudstyr såsom gravemaskiner, kraner, bulldozere og transportbåndssystemer. De håndterer tunge belastninger og giver pålidelig kraftoverførsel i krævende miljøer.
4. Landbrug: Motorkæder anvendes i landbrugsmaskiner såsom traktorer, mejetærskere og vandingssystemer. De hjælper med at drive forskellige komponenter og sikre effektiv drift i landbrug og afgrødeproduktion.
5. Materialehåndtering: Motorkæder er afgørende i materialehåndteringsudstyr, herunder gaffeltrucks, taljer og elevatorer. De muliggør løft og flytning af tunge laster, hvilket sikrer præcis kontrol og sikker drift.
6. Energi og forsyning: Motorkæder bruges i kraftproduktionsanlæg, såsom turbiner og generatorer, til at overføre rotationskraft. De findes også i vindmøller, vandkraftværker og andre vedvarende energisystemer.
7. Fødevarer og drikkevarer: Motorkæder anvendes i fødevareforarbejdningsudstyr, herunder transportbånd, blandere, aftapningslinjer og pakkemaskiner. De sikrer effektiv og hygiejnisk materialehåndtering i fødevare- og drikkevareindustrien.
Dette er blot et par eksempler, og motorkæder anvendes i mange andre industrier, hvor kraftoverførsel og bevægelseskontrol er afgørende. Deres alsidighed, holdbarhed og evne til at håndtere høje belastninger gør dem uundværlige i forskellige industrielle applikationer.
editor by CX 2024-04-09