Produktbeskrivelse
ZheJiang Tang Chen Machinery Equipments Manufacturing Co., Ltd. is Founded in 2011 with registed capital of 25,000,000 CNY, covering a total area of 13.34 hectare including 43000 square meter workshop.The company mainly focuses on the R&D, production and sales of the mould & equipment for precast concrete elements, especially for concrete spun pile and spun pole. Instead of only supplying machinery, we provide integrated solution with value added service, so that customers can easily start production by simply turning the key. Currently the company have exported to Korea, Vietnam, Malaysia, Bangladesh, Cambodia and Indonesia. And have successfully built more than 10 overseas projects.
We are confident we will always be the right choice for you!
Tang Chen manufactures spinning machine specially for producing spun pile and electric pole. Driven by transformer, the spinning machine adopts human-computer interface to control the spinning speed in different technical phases. Therefore, the machine has high precision and is easy to operate. Meanwhile, our company also undertakes to process various kinds of spare parts of spinning machine such as shaft, riding wheel, coupling, bearing pedestal and taper sleeve.
Specifikationer
| Ingen | Project | unit | Technical Parameter | |
| 1 | Motor | Rate | kw | 45-132 |
| Rotating Speed | r/min | 1000 | ||
| 2 | Running Wheel diameter | mm | 600 | |
| 3 | Running Wheel center distance | Axle Direction | mm | 2000 |
| Radial Direction | mm | 1070 | ||
Fremstillingsproces
COMPANY INTRODUCTION
| Eftersalgsservice: | 1 år |
|---|---|
| Garanti: | 1 år |
| Type: | Transport Machinery |
| Shotcrete Type: | OEM |
| Machining Process: | Processing, Welding, Paiting |
| Struktur: | Electrical Motor |
| Tilpasning: | Tilgængelig | Tilpasset anmodning |
|---|
Hvordan fejlfinder man almindelige problemer med motorkæder?
Fejlfinding af almindelige problemer med motorkæder involverer at identificere den grundlæggende årsag til problemet og træffe passende korrigerende handlinger. Her er nogle almindelige problemer, der kan opstå med motorkæder, og trinene til at fejlfinde dem:
1. Chain slipping or jumping: If the motor chain slips or jumps on the sprockets, it can indicate insufficient tension, worn-out sprockets, or a damaged chain. Check the tension of the chain and adjust it according to the manufacturer’s recommendations. Inspect the sprockets for signs of wear or damage and replace them if necessary. Additionally, examine the chain for any damaged or worn-out links and replace the chain if needed.
2. For meget støj: For meget støj fra motorkæden kan skyldes forskellige faktorer, såsom forkert justering, manglende smøring, slidte komponenter eller forkert spænding. Undersøg kæden for eventuelle problemer med forkert justering, og juster justeringen om nødvendigt. Sørg for, at kæden er korrekt smurt med det anbefalede smøremiddel. Kontroller for slidte eller beskadigede komponenter, og udskift dem efter behov. Juster kædespændingen til de korrekte specifikationer.
3. Kædebinding eller blokering: Hvis motorkæden binder eller blokerer under drift, kan det skyldes forkert justering, ophobning af snavs eller utilstrækkelig smøring. Kontroller for eventuelle forkerte justeringer, og juster kædens og tandhjulenes justering, hvis det er nødvendigt. Rengør eventuelt snavs eller fremmedlegemer, der kan have samlet sig på kæden eller tandhjulene. Sørg for korrekt smøring af kæden for at minimere friktion og forbedre jævn drift.
4. Chain wear and elongation: Excessive chain wear and elongation can lead to poor performance and decreased efficiency. Regularly monitor the chain for signs of wear and measure its elongation using a chain wear gauge. If the wear exceeds the manufacturer’s recommendations, it is advisable to replace the chain with a new one.
5. Utilstrækkelig smøring: Utilstrækkelig smøring kan forårsage øget friktion, slid og for tidlig svigt af motorkæden. Kontroller smøresystemet, og sørg for, at kæden er korrekt smurt med det anbefalede smøremiddel. Juster smørefrekvensen eller -metoden om nødvendigt for at sikre optimal smøring.
When troubleshooting motor chain issues, it is important to refer to the manufacturer’s guidelines and recommendations. If the problem persists or if you are unsure about the appropriate troubleshooting steps, it is recommended to consult a professional or the chain manufacturer for further assistance.
Hvordan smører og vedligeholder man en motorkæde korrekt?
Korrekt smøring og vedligeholdelse er afgørende for at sikre optimal ydeevne og levetid for en motorkæde. Her er trinnene til korrekt smøring og vedligeholdelse af en motorkæde:
1. Rengør kæden: Rengør motorkæden for snavs, affald eller gammelt smøremiddel inden smøring. Brug et egnet rengøringsmiddel og en børste eller klud til forsigtigt at skrubbe kæden. Sørg for, at kæden er helt tør, før du fortsætter.
2. Choose the right lubricant: Select a lubricant specifically designed for motor chains. Consider factors such as the operating conditions, temperature, and load requirements when choosing the lubricant. Consult the manufacturer’s recommendations or seek professional advice if necessary.
3. Påfør smøremidlet: Påfør smøremidlet jævnt over hele motorkædens længde. Brug en egnet applikator eller en sprayflaske for at sikre en grundig dækning. Vær særlig opmærksom på kontaktpunkterne mellem kæden og tandhjulene.
4. Fjern overskydende smøremiddel: Efter påføring af smøremidlet skal det trænge ind i kæden i et par minutter. Brug derefter en klud eller klud til at tørre overskydende smøremiddel af. Dette hjælper med at forhindre ophobning af snavs og affald på kæden.
5. Regelmæssig inspektion: Inspicer regelmæssigt motorkæden for tegn på slid, korrosion eller skader. Se efter forlængelse, revnede plader, beskadigede stifter eller for meget slør. Hvis der findes problemer, skal der træffes passende foranstaltninger, f.eks. udskiftning af kæden eller reparation af de beskadigede komponenter.
6. Tension adjustment: Check the tension of the motor chain regularly. Improper tension can cause excessive wear and reduce the chain’s performance. Follow the manufacturer’s guidelines or consult a professional to ensure proper tensioning.
7. Planlæg vedligeholdelse: Opret en vedligeholdelsesplan for motorkæden. Dette omfatter regelmæssig rengøring, smøring, inspektion og eventuelle nødvendige justeringer eller udskiftninger. Overhold planen for at holde kæden i optimal stand.
Ved at følge disse trin og opretholde en regelmæssig vedligeholdelsesrutine kan du maksimere din motorkædes ydeevne og levetid.
How do you select the right motor chain for a specific motor?
When selecting a motor chain for a specific motor, there are several factors to consider. Here is a step-by-step guide:
1. Determine the motor specifications: Start by understanding the motor’s power rating, speed, and torque requirements. This information will help you choose a motor chain that can handle the motor’s power output and torque demands.
2. Identify the application requirements: Consider the specific application in which the motor will be used. Determine if the motor will be subjected to high loads, high speeds, or harsh environmental conditions. This will help you select a motor chain that is suitable for the application’s demands.
3. Determine the chain type: Motor chains come in various types, including roller chains, silent chains, bush chains, and more. Each chain type has its own characteristics and performance capabilities. Select a chain type that aligns with the requirements of the motor and application.
4. Calculate the chain size: Determine the required chain size based on the motor’s power and torque requirements. Consider factors such as pitch size, roller diameter, and number of chain links. Manufacturers typically provide chain size charts or calculation tools to assist in selecting the right chain size.
5. Consider the environmental factors: Take into account the environmental conditions in which the motor will operate. If the motor is exposed to moisture, chemicals, high temperatures, or other harsh elements, choose a motor chain with appropriate corrosion resistance, temperature resistance, and durability.
6. Consult manufacturer recommendations: Consult the motor manufacturer’s recommendations or specifications to identify any specific requirements or restrictions for motor chains. They may provide guidance on compatible chain types, lubrication requirements, and maintenance recommendations.
7. Evaluate cost and availability: Consider the cost and availability of the selected motor chain. Evaluate factors such as initial cost, maintenance requirements, and the availability of spare parts or replacements.
By considering these factors and conducting thorough research, you can select the right motor chain that matches the motor’s specifications, application requirements, and environmental conditions. It is recommended to consult with motor and chain manufacturers or industry experts for further guidance and assistance.
editor by CX 2023-10-07