Product Description
Product Description
sprocket wheel for Brazil market
Motorcycle Sprocket Wheel, Motorcycle Sprocket Set, Chain Sprocket, Motorcycle Parts, Rear Sprocket, Front Sprocket, Cg125 Sprocket, Inner Sprocket, Engine Part, Motor Sprocket, Motorcycle spare Parts, Motorcycle chain wheel, motorcycle chain, Sprocket Wheel, Sprocket
HONDA:
C50, B50, C70, CD70, DAX70, MB80, C90, CD90, S90, H100, C100, C100-BIZ, CB100, CD100, MB100, XL100, S110, CB125, CD125, CG125, TITAN-99, TITAN-2000, TITAN-150, NX125, XL125, XLR125, GL145, CBX150, NXR150 BROS, CBX200, NX200, TRX200, XL200R, CB250, XL250, CBR250, NX250, CBX250, VT250, XL250, NX250, TRX350, CB400, CBR400, NX350SHAHAR, XLX250/350, NX200, XR250, XR200, CB250N, CD100, DAX70, NX400, XR200, XR250, XR200R, GS125
SUZUKI:
A50, GT50, RV50, A80, FR80, DS80, FR80N, RV90, A100, AX100, FB100, FR100, TS100, GP100, ER100, TS100Z, AX115, FD115, CN125, ER125, GN125, GP125, GS125, TR125, AX115, FR100, C70, C90, TS185ER, G7T
YAMAHA:
DT50, GT50, RD50, RX50, YB50, RD75, FS80, GT80, LB80, RX80, V80, YB80, AG100, DT100, DX100, RS100, RX100, YB100, DT125, DT125T, DT125K, DT125R, RD125, RZD125, RS125, SR125, TW125, TZR125, YB125, XT125, YBR125, RD135, RX135, RXZ135, DT150, SR150, DT175, DT180, MX180, RX180, XV250, DT250, SR250, XT250, DT175K 6H, DT175K 4H, TDR250, YZ125, SIGMA100, CRYPTON
KAWASAKI:
GTO125, KAZE-R, GTO110
DAELIM LIBERTY 12T X 44T
ENG DAELIM ALTINO 100 40T
GARELLI ESTR 10T
GILERA SMASH 110 15T X 36T
GUERRERO DAY 100 15T X 38T
GUERRERO FLASH 110 14T X 41T
GUERRERO GLX 14T X 56T
GUERRERO TRIP 110 14T X 36T
HERO PUCH 13T X 33T
INTRUDER/HYOSUNG TN 125 14T
JNG SUZUKI GS/KATANA 125
JUKI DRIB 12T
MIN C/REBORDE 9T
MIN C/REBORDE 10T
N MAX(420) 39T
N MAX 100(420) 15T
RZF200/ANDINA125/RB125/00(77-)/PATAG 14T
TVS 13T X 39T
XX125/RX125/RZA125/SAPUCA125
Z RX/RZA125 44T
ZAN SOL 42T
ZAN XX125 15T
ZANELLA 70(FIRE PLUS) 10T
ZANELLA DUE/POCK 35T
ZANELLA DUE/POCK 38T
ZANELLA XX125/RX125/SAPUCA125
There are many items for Austrialia, Indonesia, Malaysia, Singapore, Thailand, Philippines, India, Turkey, Sri Lanka, West African, South African market and so on.
Your enquiry will be highly appreciated.
Company introduction
DINGJIAN WHEEL Co., Ltd locates in Xihu (West Lake) Dis.qiao Industrial Zone which is renowned for the base of China Motorcycle Sprockets Manufacturing. Our company is a typical manufacturing enterprise with designing, manufacturing and selling as a whole service chain.
DINGJIAN WHEEL Co., Ltd was set up in 1996, covering a total land of 12,000 square CHINAMFG and a constructive area of 8,000 square meters. Under a total investment of 20 million RMB yuan, our company owns the most advanced production equipments, perfect quality inspection system, highly efficient sales and management team and first-class technicians; since we adopt advanced production techniques and superior steel, our products have reached high standard of durability and a series of advanced national level. As our products passed the authentication of global ISO9001 quality system, our company has the power of manufacturing a complete set of sprocket products to fit the needs of motorcycle factories.
Since the founding of CHINAMFG WHEEL Co., Ltd, we uphold consistently the principles of laying full emphasis on needs of consumers, products’quality and commercial creditability; stressing the idea of common business aim, business starting, mutual benefits and developments, for building up Double Win relation with clients;our company has won the trust of a wide range of clients by competitive price and better service, this is why our company obtains better goodwill in this sprocket industry with our products selling well China-wide. and selling far to many regions like South-East Asia. Middle-East. South-America. Africa Europe and so on.
For many years, CHINAMFG WHEEL Co., Ltd insisted on a development policy of Enterprise’ Life Relies on Products’ Quality, we are succeed in fulfilling our famous brand position. DINGJlAN people have confidence in our prosperous development, we will believe in the idea of Brand Relies on Quality, and Effectiveness Depends on Scale. By upholding our development idea, we can achieve our CHINAMFG task of becoming leader in sprockets’ industry by persisting in our quality and management idea permanently. DINGJIAN WHEEL Co., Ltd is expecting your cooperation for mutual benefit producing.
>> Feedback
1.Since your feedback is very important to our business’s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service.
2.Please contact us before disputes or leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you for your understanding!
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery |
| Hardness: | Soft Tooth Surface |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: | US$ 10/Piece 1 Piece(Min.Order) | |
|---|
| Customization: | Available | Customized Request |
|---|
How do you troubleshoot common issues with motor chains?
Troubleshooting common issues with motor chains involves identifying the root cause of the problem and taking appropriate corrective actions. Here are some common issues that can occur with motor chains and the steps to troubleshoot them:
1. Chain slipping or jumping: If the motor chain slips or jumps on the sprockets, it can indicate insufficient tension, worn-out sprockets, or a damaged chain. Check the tension of the chain and adjust it according to the manufacturer’s recommendations. Inspect the sprockets for signs of wear or damage and replace them if necessary. Additionally, examine the chain for any damaged or worn-out links and replace the chain if needed.
2. Excessive noise: Excessive noise from the motor chain can be caused by various factors such as misalignment, lack of lubrication, worn-out components, or improper tension. Inspect the chain for any misalignment issues and adjust the alignment if necessary. Ensure that the chain is properly lubricated using the recommended lubricant. Check for any worn-out or damaged components and replace them as needed. Adjust the chain tension to the proper specifications.
3. Chain binding or jamming: If the motor chain binds or jams during operation, it can be due to misalignment, debris accumulation, or insufficient lubrication. Check for any misalignment and adjust the alignment of the chain and sprockets if required. Clean any debris or foreign particles that may have accumulated on the chain or sprockets. Ensure proper lubrication of the chain to minimize friction and improve smooth operation.
4. Chain wear and elongation: Excessive chain wear and elongation can lead to poor performance and decreased efficiency. Regularly monitor the chain for signs of wear and measure its elongation using a chain wear gauge. If the wear exceeds the manufacturer’s recommendations, it is advisable to replace the chain with a new one.
5. Insufficient lubrication: Inadequate lubrication can cause increased friction, wear, and premature failure of the motor chain. Check the lubrication system and ensure that the chain is properly lubricated with the recommended lubricant. Adjust the lubrication frequency or method if necessary to ensure optimal lubrication.
When troubleshooting motor chain issues, it is important to refer to the manufacturer’s guidelines and recommendations. If the problem persists or if you are unsure about the appropriate troubleshooting steps, it is recommended to consult a professional or the chain manufacturer for further assistance.
How do you properly lubricate and maintain a motor chain?
Proper lubrication and maintenance are essential for ensuring the optimal performance and longevity of a motor chain. Here are the steps to properly lubricate and maintain a motor chain:
1. Clean the chain: Before lubricating, clean the motor chain to remove any dirt, debris, or old lubricant. Use a suitable cleaning agent and a brush or cloth to gently scrub the chain. Ensure that the chain is completely dry before proceeding.
2. Choose the right lubricant: Select a lubricant specifically designed for motor chains. Consider factors such as the operating conditions, temperature, and load requirements when choosing the lubricant. Consult the manufacturer’s recommendations or seek professional advice if necessary.
3. Apply the lubricant: Apply the lubricant evenly to the entire length of the motor chain. Use a suitable applicator or a spray bottle to ensure thorough coverage. Pay special attention to the contact points between the chain and the sprockets.
4. Remove excess lubricant: After applying the lubricant, allow it to penetrate the chain for a few minutes. Then, use a cloth or rag to wipe off any excess lubricant. This helps prevent the accumulation of dirt and debris on the chain.
5. Regular inspection: Regularly inspect the motor chain for signs of wear, corrosion, or damage. Look for elongation, cracked plates, damaged pins, or excessive play. If any issues are found, take appropriate action, such as replacing the chain or repairing the damaged components.
6. Tension adjustment: Check the tension of the motor chain regularly. Improper tension can cause excessive wear and reduce the chain’s performance. Follow the manufacturer’s guidelines or consult a professional to ensure proper tensioning.
7. Schedule maintenance: Establish a maintenance schedule for the motor chain. This includes regular cleaning, lubrication, inspection, and any necessary adjustments or replacements. Adhere to the schedule to keep the chain in optimal condition.
By following these steps and maintaining a regular maintenance routine, you can maximize the performance and service life of your motor chain.
How do you select the right motor chain for a specific motor?
When selecting a motor chain for a specific motor, there are several factors to consider. Here is a step-by-step guide:
1. Determine the motor specifications: Start by understanding the motor’s power rating, speed, and torque requirements. This information will help you choose a motor chain that can handle the motor’s power output and torque demands.
2. Identify the application requirements: Consider the specific application in which the motor will be used. Determine if the motor will be subjected to high loads, high speeds, or harsh environmental conditions. This will help you select a motor chain that is suitable for the application’s demands.
3. Determine the chain type: Motor chains come in various types, including roller chains, silent chains, bush chains, and more. Each chain type has its own characteristics and performance capabilities. Select a chain type that aligns with the requirements of the motor and application.
4. Calculate the chain size: Determine the required chain size based on the motor’s power and torque requirements. Consider factors such as pitch size, roller diameter, and number of chain links. Manufacturers typically provide chain size charts or calculation tools to assist in selecting the right chain size.
5. Consider the environmental factors: Take into account the environmental conditions in which the motor will operate. If the motor is exposed to moisture, chemicals, high temperatures, or other harsh elements, choose a motor chain with appropriate corrosion resistance, temperature resistance, and durability.
6. Consult manufacturer recommendations: Consult the motor manufacturer’s recommendations or specifications to identify any specific requirements or restrictions for motor chains. They may provide guidance on compatible chain types, lubrication requirements, and maintenance recommendations.
7. Evaluate cost and availability: Consider the cost and availability of the selected motor chain. Evaluate factors such as initial cost, maintenance requirements, and the availability of spare parts or replacements.
By considering these factors and conducting thorough research, you can select the right motor chain that matches the motor’s specifications, application requirements, and environmental conditions. It is recommended to consult with motor and chain manufacturers or industry experts for further guidance and assistance.
editor by CX 2023-10-17