Product Description
We Have Following Advantages :
1. Self-design and self-produce
2. Factory direct price
3. Keep product upgrading to meet market demand
4. According to customer’s requirements to control costs and also satisfy the design requirements.
5. Small orders welcome
6. Quick shipping within 10 days
Product Specification
| Item No. | CS01 |
| DC voltage | 24V |
| Battery | 1.5-4.0Ah |
| No load speed | 6m/s |
| Bar Length | 4″ bar and chain |
| Chain Type | 1/4″(6.35) |
| Max. Cutting Length | 100mm |
| Qty/Ctn | 6pcs |
| Carton Size | 365mm*330mm*285mm |
| N.W./G.W. | 11/12kgs |
| 20′ | 5200pcs |
| 40′ | 11600pcs |
| 40’HC | 13600pcs |
Main Features
- High Quality and Efficient – This chain saw adapt high-quality guide chain which has undergone a deep quenching process ensures smooth cutting. The wood tooth design can make the chain saw stuck on the branch, cutting efficiency is higher and faster.
- Easy Operation – This mini chainsaw weight just about 0.7kg and a total length of only 33cm (13inch). Most of the people can easily control and use it, and will not be tired from being too heavy.
- Xihu (West Lake) Dis.nized Design – The integrated guide plate dissipates heat quickly and is very resistant to falling and abrasion. With non-slip handle design, the grip is very comfortable. The chain saw switch can adjust the speed according to the strength, and you can adjust the cutting speed you need according to the operating conditions.
- Efficient Cutting – Power Chain Saws takes about 10 seconds to cut a log with a diameter of 10cm (the specific value varies with the actual size and hardness of the wood). This electric saw is very suitable for trees branches pruning, gardening.Note that it is not suitable for sawing dry planks and wood that is too large
- Easy installation – Just install in a few steps. 1, Install the chain into the guide plate, then install them to chainsaw body. 2, Install the side cover and tighten the nut. 3, Use the wrench in the package to turn the screw to adjust the tightness. Just need 1 Minute for all Install.
HangZhou daguo established in 2019, our factory is 1 of the most professional enterprises in China who specialize in developing and producing garden power tools, located in HangZhou, enjoying ease access to ZheJiang and HangZhou cities. We have domestic CHINAMFG power tool accessories suppliers, such as Xihu (West Lake) Dis.cheng, Gribo, has been maintaining a good long term relationship of cooperation. We gain an outstanding reputation for the sophisticated technology, skillful manufacture and excellent quality of the garden tools. With strong R&D capacity, full productive capacity, and OEM capacity, we are capable of providing customers with superior products and the best service!
Though we are a new power tool manufacturer, Daguo is now a first domestic 4″ bar handled chain saw original design and supplier who has been gained state patent since 2571. Here we would like to introduce Mr. Kin, our technical director who graduated from the mechanical design major with a bachelor′s degree. He is particularly good at product appearance design, internal structure research, product practical performance and cost control.
In 2019, the 4-inch small chainsaw designed by KIN caused a big sensation in the current e-commerce environment and garden tools industry, and it is a hot seller and has been selling very well for long time. Many foreign trade companies want to come in as our appointed agents. At present, we also specialized in power tools, garden tools, such as pruning shears, mini chain saw, electrical trimmer and related in China for professional and DIY users worldwide. Here let us highlight 1 of our best selling products as following:
Now our factory has been already from 240 square CHINAMFG to 1000 square meters, as well as the number of employees has increased from 10 to 40, also we have already passed CE/SGS. At the same time, we are adding more and more machinery and equipment, own close to million fixed assets. We have production capacity of 30 million sets yearly. Our enterprise has been chosen as an “first choice of handled chain saw in HangZhou China”, and has several business partners in this industry.
FAQ
- Customer Questions & Answers
- Q:Are you manufacture?
- A:We are original self-design and self-produce.
- Q: What’s your MOQ?
- A: Our MOQ is 1000 units per model for GTL/OEM brand.
- Q: What’s your payment terms?
- A: We could accept L/C sight, T/T and Paypal.
- Q: What’s the delivery time?
- A: We could deliver the goods within 60 days after order confirmed.
- Q: Is the price on this page your final price?
- A: The price on this page is only for your reference. We hope you can inquiry the bottom price based on your quantity. We also have promotion season and will give discount for new customer.
- Q: How about sample buying?
- A: Yes, we could provide samples and deliver with freight collected.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard: | CE |
|---|---|
| Condition: | Brand New |
| Type: | Motorized Chainsaw |
| Power: | Electricity |
| Engine Type: | Motor |
| Colour: | Customized |
| Samples: | US$ 24/Piece 1 Piece(Min.Order) | |
|---|
| Customization: | Available | Customized Request |
|---|
How do you troubleshoot common issues with motor chains?
Troubleshooting common issues with motor chains involves identifying the root cause of the problem and taking appropriate corrective actions. Here are some common issues that can occur with motor chains and the steps to troubleshoot them:
1. Chain slipping or jumping: If the motor chain slips or jumps on the sprockets, it can indicate insufficient tension, worn-out sprockets, or a damaged chain. Check the tension of the chain and adjust it according to the manufacturer’s recommendations. Inspect the sprockets for signs of wear or damage and replace them if necessary. Additionally, examine the chain for any damaged or worn-out links and replace the chain if needed.
2. Excessive noise: Excessive noise from the motor chain can be caused by various factors such as misalignment, lack of lubrication, worn-out components, or improper tension. Inspect the chain for any misalignment issues and adjust the alignment if necessary. Ensure that the chain is properly lubricated using the recommended lubricant. Check for any worn-out or damaged components and replace them as needed. Adjust the chain tension to the proper specifications.
3. Chain binding or jamming: If the motor chain binds or jams during operation, it can be due to misalignment, debris accumulation, or insufficient lubrication. Check for any misalignment and adjust the alignment of the chain and sprockets if required. Clean any debris or foreign particles that may have accumulated on the chain or sprockets. Ensure proper lubrication of the chain to minimize friction and improve smooth operation.
4. Chain wear and elongation: Excessive chain wear and elongation can lead to poor performance and decreased efficiency. Regularly monitor the chain for signs of wear and measure its elongation using a chain wear gauge. If the wear exceeds the manufacturer’s recommendations, it is advisable to replace the chain with a new one.
5. Insufficient lubrication: Inadequate lubrication can cause increased friction, wear, and premature failure of the motor chain. Check the lubrication system and ensure that the chain is properly lubricated with the recommended lubricant. Adjust the lubrication frequency or method if necessary to ensure optimal lubrication.
When troubleshooting motor chain issues, it is important to refer to the manufacturer’s guidelines and recommendations. If the problem persists or if you are unsure about the appropriate troubleshooting steps, it is recommended to consult a professional or the chain manufacturer for further assistance.
Can a motor chain handle heavy loads?
Yes, motor chains are designed to handle heavy loads in various applications. Here are some factors to consider:
1. Chain Strength: Motor chains are available in different strength ratings, typically measured in terms of their maximum allowable tension or breaking strength. It is important to select a motor chain with a strength rating suitable for the anticipated loads in your application. Chains with higher strength ratings can handle heavier loads.
2. Chain Material: Motor chains are commonly made from high-strength steel or alloy materials that provide excellent durability and load-bearing capacity. The choice of material depends on the specific application requirements, including the expected load, environmental conditions, and any regulatory standards.
3. Chain Design: Motor chains designed for heavy-load applications often have robust construction features to enhance their load-carrying capabilities. These may include larger pitch sizes, thicker plates, hardened components, and precision manufacturing. The design ensures that the chain can withstand the forces and stresses associated with heavy loads.
4. Lubrication: Proper lubrication is essential for motor chains handling heavy loads. It helps reduce friction and wear, ensuring smooth operation and extending the chain’s service life. Adequate lubrication also prevents overheating and corrosion, which can negatively impact the chain’s load-carrying capacity.
5. Sprocket Design: The sprockets that engage with the motor chain also play a crucial role in handling heavy loads. Sprockets should be designed to evenly distribute the load across the chain and provide reliable engagement. Robust and properly sized sprockets ensure that the chain can effectively transmit the heavy loads without excessive wear or failure.
When considering a motor chain for heavy-load applications, it is important to consult the manufacturer’s specifications and guidelines. They can provide detailed information on the chain’s load-carrying capacity, including factors such as tensile strength, working load limits, and recommended safety factors. Proper chain selection, regular maintenance, and adherence to load limitations are key to ensuring safe and efficient operation under heavy loads.
How does a motor chain differ from a regular chain?
A motor chain, also known as a power transmission chain, differs from a regular chain in terms of its design and purpose. Here are the key differences:
1. Load Capacity: Motor chains are specifically designed to handle higher loads compared to regular chains. They are built to transmit power and motion between different components in mechanical systems.
2. Precision and Accuracy: Motor chains often have precise tooth profiles or roller systems that ensure accurate positioning and synchronization of components. This is important in applications such as engines, where precise timing is critical.
3. Durability and Strength: Motor chains are built to withstand heavy loads, high speeds, and continuous operation. They are constructed using high-quality materials and advanced manufacturing techniques to ensure durability and strength.
4. Lubrication and Maintenance: Motor chains may require specific lubrication to reduce friction and wear, ensuring smooth operation. Regular maintenance, such as periodic inspection and lubrication, is important to keep the chain in optimal condition.
5. Application-Specific Design: Motor chains are designed for specific applications, such as power transmission in engines, conveyor systems, or lifting equipment. They are engineered to meet the unique requirements of these applications, considering factors such as load capacity, speed, environment, and operational conditions.
It’s important to note that while motor chains are designed for specific applications, they may have similarities with regular chains in terms of basic construction and functionality. However, motor chains are engineered to handle higher loads, provide precise motion transmission, and ensure reliable performance in demanding industrial settings.
editor by CX 2024-04-25