We could supply different size of bush for industrial roller chain.
| Ngalan sa produkto | Bush |
| Aplikasyon | 06C~32B |
| Materyal | Alloy steel |
| Material grade | SAE8620 SCM420 C1018 20CrMnMo 20Mn 40Cr A3 |
| Pagtambal sa kainit | Anaa |
| Dimensyon | According to your drawing |
| Pakete | Plywood case |
| Sampol | Anaa |
| MOQ | 300KGS~500KGS |
| Oras sa pagpanguna | 30 Days |
| FOB port | HangZhou o ZheJiang |
| Standard bush dimension list | ||||||
| Butang | Material grade | Panggawas nga diametro | inner diameter | Gitas-on | concentricity | gap |
| 04C (25) | 20Mn/10# | 3.3-0.01/-0.03 | 2.31+0.07/+0.05 | 4.78-0.075 | 0.015 | ≤0.1 |
| 04CH (25H) | 20Mn/10# | 3.3-0.02/-0.05 | 2.31+0.07/+0.05 | 5.23-0.12 | 0.015 | ≤0.1 |
| 06C | 20Mn/10# | 5.08-0.03 | 3.58+0.09/+0.06 | 7.4-0.15 | 0.571 | ≤0.12 |
| 06B | 20Mn/10# | 4.77-0.03 | 3.28+0.09/+0.07 | 8.5-0.15 | 0.571 | ≤0.12 |
| 420 | 20Mn/10# | 5.63-0.03 | 3.96+0.09/+0.06 | 9.4-0.15 | 0.04 | ≤0.15 |
| 08A 40 | 20Mn/10# | 5.63-0.03 | 3.96+0.09/+0.06 | 11.1-0.18 | 0.04 | ≤0.15 |
| 08B (428) | 20Mn/10# | 6.37-0.03 | 4.45+0.09/+0.07 | 11.1-0.18 | 0.04 | ≤0.15 |
| 08BH (428H) | 20Mn/10# | 6.37-0.03 | 4.52+0.02 | 12.2-0.18 | 0.04 | ≤0.15 |
| 10A (50) | 20Mn/10# | 7.03-0.03 | 5.08+0.09/+0.06 | 13.7-0.18 | 0.06 | ≤0.15 |
| 10B | 20Mn/10# | 7.03-0.03 | 5.08+0.09/+0.06 | 13.2-0.18 | 0.06 | ≤0.15 |
| 12A 60 | 20Mn/10# | 8.33-0.03 | 5.94+0.12/+0.08 | 17.65-0.18 | 0.06 | ≤0.15 |
| 12AH (60H) | 20Mn/10# | 8.33-0.03 | 5.94+0.12/+0.08 | 19.3-0.21 | 0.06 | ≤0.15 |
| 12B | 20Mn/10# | 8.1-0.03 | 5.72+0.1/+0.07 | 15.55-0.18 | 0.06 | ≤0.15 |
| 16A 80 | 20Mn/10# | 11.1-0.03 | 7.92+0.13/+0.09 | 22.5-0.21 | 0.08 | ≤0.15 |
| 16AH 80H | 20Mn/10# | 11.1-0.03 | 7.92+0.13/+0.09 | 24.1-0.21 | 0.08 | ≤0.15 |
| 16B | 20Mn/10# | 11.5-0.03 | 8.28+0.11/+0.075 | 25.43-0.21 | 0.06 | ≤0.15 |
| 20A 100 | 20Mn/10# | 13.58-0.03 | 9.61+0.04 | 27.35-0.25 | 0.08 | ≤0.15 |
| 20B | 20Mn/10# | 14.05-0.03 | 10.19+0.15/+0.1 | 28.9-0.21 | 0.08 | ≤0.15 |
| P38 (ZGS38) | 20Mn/10# | 12-0.03 | 9+0.1/+0.15 | 28.1-0.21 | 0.08 | ≤0.15 |
| 24A 120 | 20Mn/10# | 15.6-0.03 | 11.1+0.19/+0.13 | 35.2-0.25 | 0.08 | ≤0.15 |
| 24B | 20Mn/10# | 18.69-0.03 | 14.63+0.21 | 37.7-0.25 | 0.08 | ≤0.15 |
| S38H | 20Mn/10# | 12-0.03 | 9+0.1/+0.15 | 29.9-0.21 | 0.08 | ≤0.15 |
| CA550 | 20Mn/10# | 11.11-0.03 | 7.1+0.16/+0.1 | 25.6-0.25 | 0.08 | ≤0.15 |
Mga Kanunayng Pangutana
Q:Can you produce parts according to CZPT drawing?
A:Yes
Q:May I visit factory before co-operation
A:We always welcome your visit us to know each other well and know well about CZPT products.
Q:Can you accept small quantity orders
A:Yes, We will give CZPT best service for each order.
Q:What’s your payment terms
A:We accept T/T.
Giya sa Pagpalit Unsa ang Labing Maayo nga Kadena sa Motorsiklo? Giya sa Pagpalit pinaagi sa Klase sa Pagsakay Ang labing maayo…
Giya sa Paghimo — Pag-ilis sa Kadena Unsaon Pag-ilis sa Kadena sa Motorsiklo Sunod-sunod nga Giya sa Kadena sa Motorsiklo…
Giya sa Paghimo — Pagsukod sa Pagkaguba sa Kadena Unsaon Pagsukod sa Pagkaguba sa Kadena sa Motorsiklo Ang Kompleto nga Pamaagi…
Giya sa Pagmentinar — Paglubricate sa Kadena Unsaon Paglubricate sa Kadena sa Motorsiklo Sunod-sunod nga Giya Ang saktong…
Giya sa Pagsulbad sa Problema Ang Kadena sa Motorsiklo Padayong Nag-inat Mga Hinungdan ug Solusyon Usa ka kadena nga kinahanglan nga i-adjust matag…
Giya sa Paghimo — Tensyon sa Kadena Unsaon Pag-adjust sa Tensyon sa Kadena sa Motorsiklo Sunod-sunod nga Giya sa Tensyon sa Kadena…