Jeftini toplinski tretman, cijena kovanog Ir-a na lancu pogona za odvoz otpada H klase

Opis proizvoda

“H” CLASS Refuse Drag Chains

“H” CLASS Refuse Drag Chains is used for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive waste materials through either wooden or steel troughs. Because of its large, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable carrying capacity when operated at moderate speeds. 
CZPT površina svake cijevi je ravna, što pruža široku površinu za guranje materijala duž žlijeba i sprječavanje da stolica prelazi preko vrha materijala. Zaobljena unutrašnja strana cijevi je pažljivo oblikovana kako bi se osigurao odličan kontakt s lančanikom. Bočne šipke su ojačane papučama protiv habanja koje pružaju oboje. 
dodatna površina za habanje i učvršćivanje karike. Vertikalni element na svakoj bočnoj traci osigurava dodatnu krutost karike i štiti klin od oštećenja. 
“H”CLASS Refuse Drag Chain is CZPT in HZPT Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This rugged working chain is CZPT in a pitch range of 5.000 to 8.000 inches. Each link is produced in accordance with manufacturer’s standards and may be interchanged with links made by other chain manufacturers. “H”CLASS Refuse Drag Chain is CZPT in riveted construction only. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins. 
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain operation. CZPT s should always be run in the direction of the closed barrel. 

Povezani proizvod

Profil kompanije