6000bph OPP Label Plastic Bottle Glass Bottle Rotary Hot Melt Adhesive Labeling Machine

6000BPH OPP Label CZPT Bottle Glass Bottle Rotary Sizzling Soften Adhesive Labeling Device

Approach of Procedure
The containers are picked up by the infeed starwheel and transferred to the container desk. The container rotation begins when they are positioned amongst container plates and centering bells.
The pace of the feed roller is modified to the required label duration for continuous web pressure. A normal threading unit ensures optimal movie feed. In the slicing device, the labels are exactly lower while a PLC command and servo-motor offer an specific cut-off stage.
Two narrow strips of hotmelt glue the labels collectively, which are applied by a heated glue roller to the foremost and trailing label edges. The label with the glue strip on its major edge is transferred to the container. This glue strip assures an specific label positioning and a positive bond. As the container is rotated throughout label transfer, labels are used tightly. Gluing of the trailing edge guarantees proper bonding.

Approach:  Infeed bottle →  pre-placement →label chopping → gluing → labeling→label by press out → finish

CZPT parameters: 
Power source : 3-period 380V fifty Hz 8000W
The overall size of tools:1820mm (conveyor duration 3000mm ili can be regulate base on your item strains)
Products width:1200 mm 
Machine total measurement:2330×2360(mm)
CZPT speed: 30m/min (the velocity of the transmission lines can be modified in accordance to real manufacturing)
The approach of speed adjustment:  uninterrupted – modify charge
The premier Pace of labels feed: maximum pace of 100 meters labels / min
The premier pace of labeling:6000 pcs/H
Labeling precision: ± 1mm
Built-in Labeling precision: ± 1mm
Item Size: 750ml
Optimum label width: 150mm
The highest duration of label: 500mm
The optimum diameter of label: 600 mm
Paper main diameter: 152 mm
Labeling glue:  leading and trailing edge gluing with hot melt 
Gluing temperature: 120~160ºC
Sort of label: opp label ,paper-plastic composite film label,paper label
Labeling workstation :six for each cycle
The quantity of labeling mold: one particular suit (to be content with one solution, every single mold contains infeed worm ,infeed starwheel ,discharge starwheel, place bottle and so on )
Machine bodyweight: about 2000 Kg

specification checklist:

NE	dizajn	Brend	Location of generation	Quantity	Remarks
jedan	Servo motor	Sanyo	Japan	1	750W
2	Servo travel	Sanyo	Japan	jedan	750W
tri	Inverter	Danfosss	Denmark	3
četiri	Switch	Merlin	France	1
5	Breaker	TE	France	jedan
šest	Relay	Omron	Japan	tri	24V
7	Unexpected emergency stop swap	TE	France	2
8	Energija	MINGWEI	Žeđiang	jedan	6A
9	Management cable		Kina
deset	PLCProgrammable Controller controlController	Siemens	Germany	2
jedanaest	Contact-screen	Weinview	Žeđiang	jedan	MT4300C
12	Warning lights	Q-Light-weight	Korea	1
trinaest	Fiber Cable	KYENESE	Japan	devet
četrnaest	Fiber amplifier	KYENESE	Japan	9
petnaest	CZPT eye take a look at	Sick	Germany	2
šesnaest	Motor	TRANSTECNO	Italija	1	750W
sedamnaest	CZPT motor reducer	TRANSTECNOO	Italija	1	1:15
18	Glue Motor wave box	Pansonic	Japan	1
19	Glue speed regulating motor	Pansonic	Japan	1
dvadeset	Nehrđajući metal		Kina		304

Često postavljana pitanja

1) Can your factory provide the whole plant from A to Z?
A: Yes, we can provide the complete plant, from bottling making plant, water purification plant, to filling packing plant. 

2) Are all machinery your factory made? 
A: Our factory make the water purification and filling packing plants.  We do not make the bottle making machinery, 
we have good quality bottle making machinery partner, and we provide to customer same long warranty time and good after service.
 
three) How can I know the machinery quality before I order? 
A: Frist, we will invite you visiting our factory to check the machines quality, and show the machines running for you in our factory. 

four)What certificates you can provide?
A: Our factory provide the CE, SGS, ISO, and accroding to some countries, we also can provide the Pvoc, Coc, Soncap…ect 

five)Can your factory make the bottle drawing, workshop layout, and labels for us? 
A: We can help customers design their own bottle shape, workshop layout and label drawings, these jobs are free charge.
 (Workshop need customer to provide the size of factory) 

6)Installation and Training Time
A: We have professional engineer for oversea installaion and training, they can speak English, and have much experience oversea work.